730098

ZyXEL WRE6606 Handleiding

1
Verklein
Vergroot
Pagina terug
1/1
Pagina verder
WRE6606
Wireless AC1300 Range Extender
Quick Start Guide
ENGLISH
Wait until the LED steady on
Hardware Installation
A
C
R
Initial Configuration
Power On
ET HE RN ET
Follow eaZy 123 setup wizard
WRE6606
Password
1234
Login
Windows and Mac:
http://zyxelsetup.local
Windows 8:
http://zyxelsetup
Password: 1234
(default)
Open Web Browser
Wait until the LED steady on
Power On
Check LED Lights
2.4G
5G
5G Uplink
Signal Strength
2.4G Uplink
Signal Strength
eaZy 123 Setup
Choose a 2.4 GHz Wi-Fi network
Select Signal Wi-Fi Network Security Wireless
Choose your 2.4 GHz Wi-Fi network you wish to extend. We recommend to have at least 70% signal strength.
Skip Setup
1
100% wifiname_1 WPA2-PSK b/g/n
100% wifiname_2 No Security b/g/n
Continue Scan Again Skip 2.4 GHzChoose Network Manually
eaZy 123 Setup
Choose a 5 GHz Wi-Fi network
Select Signal Wi-Fi Network Security Wireless
Choose your 5 GHz Wi-Fi network you wish to extend. We recommend to have at least 70% signal strength.
Skip Setup
1
100% wifiname_1 WPA2-PSK b/g/n
100% wifiname_2 No Security b/g/n
Continue Scan Again Skip 2.4 GHzChoose Network Manually
eaZy 123 Setup
Enter 2.4 GHz Wi-Fi Network’s Password
Please enter in the 2.4GHz wireless network’s password that
you’re extending.
Skip Setup
2
Continue
eaZy 123 Setup
Set your Extender’s Wireless Network
2.4 GHz Wireless Name (SSID):
Please write down all information that you’ve input here,
so that you can refer to it in the future. When you’re ready
to apply this setup, click on “Apply”.
Skip Setup
3
Apply
2.4 GHz Wireless Password:
Zyxel_xxxxx
12345678
5 GHz Wireless Name (SSID):
5 GHz Wireless Password:
Zyxel_xxxxx.speed
12345678
IMPORTANT!
eaZy 123 Setup
New 2.4 GHz Wireless Network
Skip Setup
Wireless Password: 12345678
Wireless_Name: Zyxel_xxxxx
Wireless Password: 12345678
Wireless_Name: Zyxel_xxxxx.speed
New 5 GHz Wireless Network
2.4 GHz Detecting 5 GHz Detecting
eaZy 123 Setup
Manually enter in the 2.4GHz wireless network settings
Skip Setup
2
Continue
Wireless Name (SSID):
Enter Wi-Fi network here
No Security
Enter Wi-Fi password here
6
7
/ No WPS
A-1
North America
USA
+ 1 800 978 7222
support@zyxel.com
Support Information
Copyright © 2017 Zyxel Communications Corp. All Rights Reserved.
See the User’s Guide at www.zyxel.com for more information,
including customer support and safety warnings.
EU Importer
Zyxel Communications A/S
Generatorvej 8D, 2860 Søborg, Denmark.
http://www.zyxel.dk
US Importer
Zyxel Communications, Inc
1130 North Miller Street Anaheim, CA 92806-2001
http://www.us.zyxel.com
Finding the Ideal Location
AP or Router
1
EN
Remote clients can now wirelessly connect to your
home wireless router or AP via the WRE6606 using
the wireless router or AP's SSID/Password.
Other Modes:
For AP mode, set the WRE6606 switch to A. Connect
your computer to the WRE6606 Ethernet port and
enter http://zyxelsetup or http://zyxelsetup.local in
your browser. Configure an SSID (Wi-Fi network
name) and corresponding Wi-Fi password in eaZy
123 for the WRE6606. Now disconnect the computer
from the WRE6606 Ethernet port and connect the
WRE6606 to the wireless router using an Ethernet
cable. Wireless clients can now connect to the
Internet using the Wi-Fi network name and pass-
word you just configured in the WRE6606.
For Client mode, set the WRE6606 switch to C.
Connect your computer to the WRE6606 Ethernet
port and enter http://zyxelsetup or http://zyxelset-
up.local in your browser. Select the SSID Wi-Fi net-
work name) and enter the Wi-Fi password of your
wireless router in eaZy 123. You now can use the
WRE6606 as a wireless adapter and access the
Internet through the wireless router by connecting
your computer to the WRE6606 Ethernet port.
EN
Make sure that the WRE6606 switch is set to R
(Repeater mode).
Note down your home wireless router or AP's cur-
rent wireless network name (SSID) and password in
order to connect the WRE6606 to it. Clients also use
these to connect to your home wireless router or AP
via the WRE6606.
EN
Note: Use Option A if your wireless router does
not support WPS or has WPS compatibility issues.
Initial Configuration - No WPS
First, connect your computer to the WRE6606
using an Ethernet cable. Open your web
browser and type http://zyxelsetup (Windows)
or http://zyxelsetup.local (Mac). If you can't
connect, check you're using a supported
browser version.
eaZy 123 runs automatically the first time you
access the WRE6606. If it doesn't open, click
the eaZy 123 icon on the upper right corner of
any Web Configurator screen.
EN ENEN
Make sure that the WRE6606’s wireless 2.4G
and/or 5G Wi-Fi settings are the same as the
Wi-Fi settings on your wireless router or AP.
Wait for the 2.4G and/or 5G LEDs to light.
If the 2.4G or 5G LEDs do not light, the Wi-Fi
connection has failed. Check that your wireless
router or AP is turned on. Check that your
wireless router or AP SSID and password are
correct, then reenter them in eaZy 123.
2
3
4
eaZy 123 scans for available 2.4 GHz Wi-Fi net-
works and displays the network list. If you want
to associate with a 5 GHz network, click Skip 2.4
GHz.
In the 2.4 GHz network list, select your home
wireless router or AP SSID and enter its Wi-Fi
password (key). Click Continue.
If the wireless router or AP you want to connect
to is not listed, click Choose Network Manually,
then enter the SSID, security type and associat-
ed password of your wireless router or AP. Click
Continue.
The 5 GHz network list displays. Repeat previous
steps to select and connect to a 5 GHz Wi-Fi
network.
5
Next you want to to position the WRE6606
mid-way between your wireless router or AP and
the Wi-Fi dead zone where the wireless clients are.
Disconnect the WRE6606.
Tip: Connect a power bank (portable charger)
with DC 5V/2.1A output to the WRE6606's
micro-USB port, so that you can carry the
WRE6606 around the house to determine the
best deployment location. You want the
WRE6606 to be close enough to the clients so
that the signal is strong enough to be repeated.
When you have found a good location, plug the
WRE6606 into a nearby outlet.
The 2.4G and/or 5G LEDs should be green or
orange. If they're red, the WRE6606 is too far
from the wireless router or AP - move the
WRE6606 closer, but not too close as to cause
interference.
1
(IE 9.0 and later, Firefox, Chrome)
Current Location
Power Bank
Optional
Check LED Lights
2.4G
5G
5G Uplink
Signal Strength
2.4G Uplink
Signal Strength
Poor
Fair
Good
Red:
Orange:
Green:
2
Ideal Location
2
/ WPS
Initial Configuration
within
minutes
2
AP or Router
Hold for 2 seconds
WPS ON
Push ONCE
Wait until the LED steady on
WPS ON
B-1
B-2
B-3
A-1
A-2
A-3
A-2
A-3
A-4
A-5
A-6
EN
Initial Configuration - WPS
If your existing wireless router or AP supports
WPS, press its WPS button for 2 seconds and
then press the WPS button on the WRE6606,
within 2 minutes of each other. The WPS LED
starts blinking.
Wait for the WPS LED to become steady again,
and then check that the 2.4G and/or 5G LEDs
light, indicating a secure WRE6606-to-Router
Wi-Fi connection. If the 2.4G and/or 5G LEDs do
not light, the WRE6606-to-Router Wi-Fi con-
nection using WPS has failed. Use the No WPS
method.
B-1
B-2
Troubleshooting
Problem: I entered http://zyxelsetup or http://zyxelsetup.local in my
browser, but the web configurator login page didn't open.
Possible Solutions:
1. It’s preferable to connect to the WRE6606 using Ethernet. If you
logged in using Wi-Fi and changed the Wi-Fi settings, you must use the
new settings to log in again.
2. Try a different browser.
3. Turn off the WRE6606, wait 10 seconds, then turn it back on.
4. Try http://192.168.1.2 instead of http://zyxelsetup or http://zyxelsetup.lo-
cal. When using http://192.168.1.2, your computer should have an IP
address in the 192.168.1.3~192.168.1.254 range.
5. Reset the WRE6606 back to the factory defaults. Press the WPS/RE-
SET button and hold it down for 10-15 seconds. Unplug and re-plug the
WRE6606 if it does not restart automatically.
Problem: I cannot connect to the Internet via the WRE6606 in Repeater
mode.
Possible Solutions:
1. Check you have entered the same Wi-Fi network password as your
wireless router in eaZy 123.
2. The WRE6606 in Repeater mode may not be within the Wi-Fi signal
range of your wireless router. Move the WRE6606 closer and try again.
The 2.4G or 5G LEDs should be orange or green.
3. Check that your wireless router doesn’t have security features
enabled such as MAC Filtering or a firewall. Disable MAC Filtering or the
firewall on your wireless router if it does.
4. If the wireless settings on your wireless router have changed, this will
break the link between the WRE6606 in Repeater mode and your
wireless router. Run eaZy 123 again to establish the connection with the
new settings.
B-3
A
B
A-4
A-5
A-6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ZyXEL WRE6606 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ZyXEL WRE6606 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,22 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van ZyXEL WRE6606

ZyXEL WRE6606 Gebruiksaanwijzing - English - 113 pagina's

ZyXEL WRE6606 Snelstart handleiding - Alle talen - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info