792481
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
Most SoundBase users teach the
SoundBase to respond to their preferred
remote control using the SounBase built-in
“learning” function. Should this approach not
work with your preferred remote control, there
is an alternate method that can allow your
preferred remote to control the sound level
heard from the SoundBase.
To use this method, your preferred remote
control needs an Aux or Audio device button
in addition to device buttons for the TV and
set top box. This method cannot be used if
your preferred remote control controls only
two devices (Set Top Box and TV). You will
also need the User Manual for your specic
Cable or Satellite remote control, along
with the “device brand and code” list for
your remote control. This list may be a
separate document from the remote
control User Manual.
Using the PS numbers 1 through 6, you set
the SoundBase to respond to the volume/
mute/power infrared commands of a specic
TV or audio system manufacturer. In most
cases, you need to choose a different brand
than your TV. Choosing a brand that is
different from your TV eliminates the chance
that the TV’s internal speakers will start
playing along with the SoundBase. Sony is a
good choice from the PS menu for any brand
of TV that is not Sony. Most cable or satellite
remote controls can be adjusted to control a
SoundBase set to “Sony” in the PS menu. If
you have a Sony TV that will not allow you to
turn off the internal speakers, you will have to
choose a different brand from the PS menu
numbers 1 through 6.
Once you have chosen a brand from the
SoundBase PS menu, you need to adjust
the setting on your cable or satellite remote
Using the SoundBase remote control emulation modes
PS 1 through PS 6:
so its Volume buttons adjust that same
brand of Aux or Audio device. There are two
adjustments you may need to make on the
cable or satellite remote.
Cable/Sat remote adjustment 1: The
volume buttons on a cable or satellite
remote are typically locked adjust on the
TV’s internal speakers. Even if you press the
“Cable” button on your remote, the volume
buttons will still send out volume commands
for your TV, not the cable box. You need to
unlock the Cable/Sat remote volume buttons
according to the cable or satellite remote
control’s instructions. Once unlocked,
pressing Aux on the Cable/Sat remote
will then cause the volume buttons on the
Cable/Sat remote to control whatever brand
of device is set on the Aux button.
Cable/Sat remote adjustment 2: The
cable/satellite remote instructions will also tell
you how to set the “AUX” or “AUDIO” button
to the brand you chose on the SoundBase
PS menu. The instructions should list a few
numbers that let you control a device that
responds to Sony codes, for instance.
Try the different “number code” options
listed until you nd one that controls the
SoundBase. If you cannot nd a code that
controls the SoundBase, you can set the
SoundBase to one of the other four brands
available and search for a compatible code
for that brand.
Once you nd a code number that controls
the SoundBase, you can then “lock” the
cable or satellite remote volume buttons to
adjust only the Aux or Audio device and not
the TV. Once locked, the volume buttons
will always control the SoundBase, even
if a TV/Cable/Satellite/DVD button on the
Cable/Satellite remote control is pressed.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zvox SoundBase 350 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zvox SoundBase 350 in de taal/talen: Engels als bijlage per email.

De handleiding is 0.26 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Zvox SoundBase 350

Zvox SoundBase 350 Snelstart handleiding - English - 2 pagina's

Zvox SoundBase 350 Gebruiksaanwijzing - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info