792486
6
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
1. Speaker Placement
You can place the soundbar on any at, stable surface near your TV.
There are three general placement options, illustrated above:
Face Front You can place the soundbar on a at surface so it faces forward. This
placement is ideal for a shelf below, above or near the television.
Face Up You can place the soundbar facing up—often in front of the television. The
bottom of the soundbar should face the listening area. Check to ensure
the soundbar does not block the television infrared remote sensor. There
should be no shelf or at surface immediately above the soundbar in this
conguration.
Wall Mount The soundbar has two sturdy keyhole-shaped hanger mounts on the back
panel. You can hang the soundbar on two screwheads that are securely
installed in a wall or other vertical surface.
If you have a powered subwoofer you wish to use with this soundbar, the subwoofer
connection guide is located on the last panel of this document.
Consider the nish of the surface that will support the soundbar. It is the soundbar owner's
responsibility to insure that a surface nish that contacts the soundbar is protected,
should this be a concern of the soundbar owner. The contact area on the soundbar is
made of inert synthetic materials that typically do not react with furniture or wall nishes. But
any wall or surface nish can be altered by having any heavy object resting on it for a long
period of time. Place an appropriate barrier between any surface and the soundbar if you
are concerned about the nish of the supporting surface.
A safe, secure installation is the soundbar owner’s responsibility.
Use an unswitched AC outlet to provide power to the soundbar. With the soundbar's Auto
Standby feature turned on, the soundbar enters its low-power draw standby state after 20 to
30 minutes of inactivity. A soundbar uses less than 0.5 watt in Standby. Using a switched AC
outlet to cut off AC power to a soundbar system is not recommended. It delays subsequent
turn-on.
Do not place any objects on top of a soundbar.
2. Connect Your TV's Audio Output to the Soundbar
All current TVs have an audio output. It is likely that one of the cables provided with the
soundbar can be used to connect the TV audio output to an input on the soundbar. DO NOT
disconnect any video program source connected to your TV (like a cable or satellite set top box,
DVD/Bluray or similar).
2
Connect the
Soundbar
to your TV.
3
Learn the
features of the
Soundbar.
4
“Teach” the
Soundbar your
preferred remote.
1
Place or
hang the
Soundbar.
Face UpFace Front Wall Mount
Optical Digital Audio Output Jack (see above image)
Most HDTVs have an optical digital audio output jack. Use the provided optical cable to connect
the TV’s output jack to optical input 1 on the soundbar.
Simple Setup Just Four Steps
DIGITAL
AUDIO
OUT
HDMI 1 HDMI 2
VIDEO
Optical Digital
Audio Input
TV
Optical
Output
Optical Cable
Soundbar
Input
Panel
4b. End Panel Controls on the Soundbar
On the viewer’s right end of the soundbar are four buttons.
A) POWER button:
This button turns the soundbar “ON” if it is in Standby. If this button is pressed briey while the
soundbar is “ON”, it will mute and unmute the soundbar. To turn off the soundbar, press and
hold down this button for about ve seconds.
B) Volume Up/Down rocker button
Adjusts volume up and down. Pressing either side of this button will “unmute” the speaker if it is
muted.
C) Input button:
A brief press and release of the INPUT button selects the next input in sequence.
5. Tonal Prole Setting
The soundbar has three selectable tonal proles that allow it to better match the acoustics of its
room position. Use the soundbar's PS menu feature to choose one of these three settings.
Face Front ........ PS16 - on a at surface, facing front.
Face Up ............ PS17 - on a at surface, facing up.
Wall Mount ....... PS18 - on a vertical surface, facing into the room.
The default setting for the soundbar is Face Front.
If your soundbar’s position is Face Up or Wall Mount, you should select PS17 or PS18 from the
PS menu.
PS Menu: You adjust the PS Menu setting by rst pressing down on two buttons on the end
panel of the soundbar: Power ( ) and Volume Up (+). After about ve to seven seconds you
should see PS start ashing on the soundbar's display. The rst time you bring up the PS menu,
it should show “PS 0”.
Once you see the PS display, release the buttons. Then press and release the Volume Up button
to increase the PS number. Continue pressing and releasing the Volume Up button until you
reach the setting you want: PS16, PS17 or PS18.
If your home TV system does not match the descriptions in this
guide, don’t hesitate to send an inquiry to info@zvoxaudio.com
or call ZVOX Audio at (866) 367-9869. Please provide your TV
brand and model number. A ZVOX Audio representative should be
available (Eastern Time Zone) 9:30 AM to 7:30 PM Monday through
Friday and 10:30 AM to 5:30 PM on Saturday.
A
B
C
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zvox SB400 Soundbar bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zvox SB400 Soundbar in de taal/talen: Engels als bijlage per email.

De handleiding is 2.32 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Zvox SB400 Soundbar

Zvox SB400 Soundbar Aanvulling / aanpassing - English - 1 pagina's

Zvox SB400 Soundbar Aanvulling / aanpassing - English - 1 pagina's

Zvox SB400 Soundbar Aanvulling / aanpassing - English - 4 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info