666304
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
ZOOM RFX-300
6
Adjusting the Sound of an Effect
Adjusting the Sound of an Effect
1. To set the RFX-300 to the bypass mode,
press the BYPASS key.
The RFX-300 has two different bypass states,
depending on the currently selected effect. (For
information on which effects use which bypass type,
please refer to pages 7 - 11.)
WET MUTE
In this condition, only the effect sound is muted.
The effects (A1 - A9) using the connection as
described in "Recording (2) (Send/Return)" on page
4 operate in this way. The original sound output
level depends on the MIX control position.
DRY THRU
The original sound is output without any processing.
The setting of the MIX control has no effect.
2. To return the RFX-300 to the normal state,
press the BYPASS key once more.
Lit
To Make the Adjustment
Using the Bypass Function
The sound of effects provided by the RFX-300 can be modified by using the following controls.
The effects of the RFX-300 can be temporarily turned off. This is called the bypass mode.
TIME/ADJUST control
Adjusts the main effect parameter. Which
parameter this is depends on the currently
selected effect.
VARIATION/TAP key
This key is used to select effect variations and it also serves for the "tap input" function by which
the unit detects the key-press interval. The key operation depends on the currently selected effect.
Each push of the key toggles between
variation 1 (VARIATION/TAP key is out)
and variation 2 (VARIATION/TAP key is lit).
Time-based parameters such as delay time or flanger
modulation cycle can be easily input by tapping the key in
the desired interval (tap input).
If the key-press interval is larger than the maximum
possible setting for the current parameter, the parameter
is set to the maximum value of the tap input range.
MIX control
Adjusts the mixing ratio
of original sound and
effect sound, and also
serves to adjust other
parameters. Which
parameter this is
depends on the
currently selected
effect.
For information on
effects and adjustable
parameters, please
refer to page 7.
Variation 1 Variation 2
Flashes to indicate
input interval
When TAP indicator is lit
When VARIATION
indicator is lit
(2) Time until TAP key is pressed for
the second time is measured, and
the parameter is set accordingly.
(1) After TAP key is
pressed for the
first time...
Lit
When TIME indicator
is lit
When ADJUST indicator
is lit
Lit
Lit
The control can be used to adjust a
time-based parameter such as delay
time, reverb time, etc.
The control can be used to adjust another
parameter.
Lit
Lit
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zoom RFX300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zoom RFX300 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info