647255
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
9 10 11
12
8
4
Connect with Beam
You can use your Beam to configure other smart
devices more easily and quickly than ever. If you
see the “Connect with Beam” emblem, then you
can follow the instructions below to set up your
smart device:
1
2
3
4
Beam can connect all Zmodo WiFi devices purchased after
7/4/2016. If your device quick guide instructs you to set up your
device using “Zink” then you can follow these instructions to set
up your device instead. If your device quick guide instructs you to
set up your device using “SmartLink” then you cannot use the
Beam to automatically connect your device.
For more information, please visit
www.zmodo.com/support
7
For more instructions, troubleshooting, support, and other
resources, please visit:
www.zmodo.com/support
Like us on Facebook.com/Zmodo
Scan the QR-code below!
Follow us on Twitter @Zmodo
Scan the QR-code below!
Having difficulty?
Support
Note: Install one sensor on the door or window frame, and the other
corresponding piece on the moveable part of the door or window. When
closed, the maximum distance between the two sensors should be 2cm.
5
Connect door / window sensors
Beam has smart hub features, allowing you to connect
Zmodo accessories such as door / window sensors (sold
separately). When paired, you will be able to receive
notifications when your door or window is opened.
In order to pair a door / window sensor, access
your Beam’s Device Settings and select the “Accessories”
option. Follow the on-screen instructions to pair your
accessory.
Connect with
Beam
6
Your Beam is powering on.
Solid green
Your Beam is ready for setup.
Blinking green
Your Beam is connecting to the WiFi network. Please do
NOT turn off or unplug your Beam at this time.
Blinking blue
Your Beam has successfully connected to the WiFi
network.
Solid blue
If you were unable to connect your Beam successfully:
Please make sure that you entered the network name and
password correctly. Note: Both are case-sensitive.
Make sure that you are connecting to a 2.4GHz
WPA/WPA2 WiFi network, and that your network is not
hidden.
You may need to move your Beam closer to your WiFi
router.
Try resetting your Beam by pressing and holding the
reset pin for 5 seconds. When you let go, the light will
change colors. Retry the setup procedure when the light
is blinking green.
Status Light Definitions
If your SSID (network name) has any space(s) in it, you will
need to change your SSID by entering your router’s
settings. You can replace the space with an “_”. For
example, “My Router” is not allowed, but “My_Router”
is allowed.
Select the “Automatic” option to
connect your Zmodo devices with
your Beam.
Log in and select the Add Device
option in the upper right corner.
+
Select the number of Zmodo devices
that you will be connecting, and tap
to proceed.
Your Beam will automatically search for
and connect your device(s) to the WiFi
network. This may take a few minutes.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zmodo Beam Alert bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zmodo Beam Alert in de taal/talen: Engels als bijlage per email.

De handleiding is 0,24 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info