637212
3
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
3
The installation of the ZENEC system should be carried out by an authorized installer. Specic
knowledge and tools are required to do the installation. Incorrect installation can cause damage to the
vehicle and the ZENEC system.
Correct functioning can only be guaranteed when you use the ZENEC original accessories included
in the kit or those optionally available. The ZENEC system and the original accessories must under no
circumstances be modied or altered in any way. Inappropriate actions can cause damage to the
vehicle and the ZENEC system.
Torx screwdriver T25
Release tool for original radio / navigation system
Release tool made of plastic
Insulating tape
The target vehicle must factory congured with one of the radio or navigation systems, listed on the
previous page. The ZENEC system is not compatible with vehicles, which are equipped with a hybrid
or electro drive ex factory.
This device installation manual applies to vehicle platforms appearing in the compatibility list on the
previous page, and in a condition as offered by the respective vehicle manufacturer. Other differing
congurations and installations may result in complications and malfunctions.
The ZENEC system is equipped with an integrated DAB+ receiver. To make use of this you will need
a suitable DAB antenna (not included in kit) that must be connected to the ZENEC system. Please
pay attention that the device does not have a phantom power for the voltage supply of an active DAB
antenna.
If the target vehicle is already equipped with an original DAB antenna, it is still possible to use it in
combination with the ZENEC system. Please use the DAB antenna connector (Nr.8), which is include
in the kit, for connection.
The ZENEC system is equipped with a AM/FM dual-tuner system (Phase Diversity). If the target
vehicle is equipped only with a AM/FM single-tuner system, the optional available accessory
“ZENEC ZE-NC-ANT3” is needed for the installation.
Software updates to the ZENEC system are installed with a USB memory device. Therefore when
tting the system make sure that the USB connection of the ZENEC system will still be accessible
later (installation of USB extension cable or USB hub).
If you have questions or problems relating to the ZENEC system, please contact the dealer from
whom you purchased it.
Additional questions about the compatibility could be answered by using the ZENEC online
congurator:
www.zenec.com/congurator
TOOLS REQUIRED
No. Article Qty
1 ZENEC system 1
2 microSD card with adapter 1
3 GPS antenna 1
4 Bluetooth microphone 1
5 Main connection cable Quadlock II 1
6
Main connection cable Quadlock III 1
THE KIT INCLUDES
No. Article Qty
7
CAN bus interface 1
8
DAB antenna adapter (Fakra – SMB) 1
9
USB extension cable
1
10
24-pin connection cable (4.2, Cam, MZone)
1
11
18-pin connection cable (Mic, Cam)
1
12
Double-sided adhesive pad
1
ZENEC ZE-NC-ANT3 (antenna interface)
ADDITIONAL MOUNTING ACCESSORIES
CAUTION
NOTE
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zenec Z-E2026 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zenec Z-E2026 in de taal/talen: Engels als bijlage per email.

De handleiding is 3,99 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Zenec Z-E2026

Zenec Z-E2026 Snelstart handleiding - Nederlands - 9 pagina's

Zenec Z-E2026 Snelstart handleiding - Deutsch - 16 pagina's

Zenec Z-E2026 Snelstart handleiding - Espanõl - 9 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info