538893
92
Verklein
Vergroot
Pagina terug
1/94
Pagina verder
96
TROUBLE SHOOTING
PROBLEM POSSIBLE CAUSE HOW TO FIX, WHAT TO DO
Coffee runs
out around
the edge
of the lter
holder
Filter holder is not inserted in the brew head
properly or is not tightened enough.
Ensure the holder is properly inserted in the brew
head unit and tightened home. See Brewing
espresso.
There are coffee particles around the lter rim.
Clean the rim of the lter and wipe all coffee from
the brew head.
Brew head is dirty. Wipe the brew head with a damp cloth.
Brew head is damaged. Contact an authorised service center.
Rubber seal of the head is damaged or worn
out.
Contact an authorised service center.
Coffee does
not run
through
No water in the water tank. Fill up the tank with water.
Water tank is not properly installed. Press the tank down to ensure it sits properly.
Knob is set in another position, e.g. . Ensure the regulator knob is in position.
Filter on the brew head may be blocked. See Descaling.
Coffee lter is blocked. Coffee is ground too
nely or tamped too rmly.
Empty the lter and rinse it under running water.
Wipe the brew head with a cloth. Clear the holes
of the lter using the grey pin and re-ll with
coffee. Tamp less rmly.
Coffee lters
out in drops
Coffee is ground very nely or tamped too
rmly.
If you use very nely ground coffee, do not tamp
it too rmly.
The appliance is blocked with scale build-up. See Descaling.
Espresso
does
not have
characteristic
foam
Coffee is stale or dry.
Use fresh coffee. After opening the coffee, ensure
it is stored in a tight container.
Coffee is not tamped rmly enough. Tamp coffee more rmly.
Coffee is ground too coarsely.
Use properly ground coffee or change coffee
brand.
Not enough coffee in the lter. See Brewing espresso.
Holder
loosens
during
brewing
Coffee is tamped too rmly. Tamp ground coffee less rmly.
Coffee is ground too nely. Change to coarser coffee.
Filter holder does not sit rmly as it has not
been tightened rm enough.
Ensure coffee holder is placed correctly and
tightened home in the brew head.
See Brewing espresso.
There are coffee particles around the lter rim.
Clean the rim of the lter and clean coffee from
the brew head.
Brew head is dirty. Wipe the brew head with a damp cloth.
Brew head is damaged. Contact an authorised service center.
Rubber seal of the brew head is damaged or
worn out.
Contact an authorised service center.
Coffee is too
cold
Cups, lter or lter head are cold.
Before brewing, pre-heat cups, lters and holder.
See Brewing espresso.
When making cappuccino or latte, milk is not
heated enough.
Check if milk is properly heated during frothing.
Do not let milk boil. See Frothing milk.
No steam
from steam
wand
Steam wand is blocked. See Maintenance and cleaning.
Not enough
frothed milk
Milk is not fresh. Check if milk is fresh.
Temperature of milk is too high. Check that milk is properly cooled before use.
Jug.
To obtain best results when frothing, use the
stainless steel jug provided and cool it down or
rinse with cold water if possible.
Steam wand is blocked. See Maintenance and cleaning.
Milk has been boiled. Try again using fresh, cooled milk.
GW13-023_v02
92

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer Maestro 13Z012 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer Maestro 13Z012 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 3,94 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info