539210
52
Verklein
Vergroot
Pagina terug
1/54
Pagina verder
56 AH1500-001_v01
AUTOMATIC STEAM SHUT-OFF
The humidier has an automatic steam off function, which
will be activated in the following cases:
a) If during operation of appliance the water level drops
below the required level, a safety switch automatically
stops the appliance operation, preventing it from
overheating. At the same time you will hear a triple beep,
the operation indicators on buttons will ash, reminding
of the need to ll the water tank.
In the sleep mode, only the symbol „ is
blinking on the LCD.
If within one minute, the water tank is not lled, the air
humidier automatically turns off.
If at the time of lling the water tank the
appliance will automatically switch off, after
installing the water tank on the humidiers
base, press the “ON/OFF” button to restart the
appliance.
b) During operation, removing the water tank or incorrect
installation of the tank on the base of air humidier
will launch a safety switch that automatically stops
the appliance, preventing it from overheating. If within
15 seconds the water tank will not be placed on the
humidier’s base, you will hear three beeps and the
indicators on the buttons will ash.
In the sleep mode, only the symbol „ is
blinking on the LCD.
After placing the water tank on the humidier’s base, the
appliance within 3 seconds will return to normal operation
mode. However, if within one minute the water tank will not be
placed on the humidiers base, the appliance automatically
turns off.
If the appliance was automatically switched
off after installing the water tank on the
humidiers base, press the “ON/OFF” button
to restart the appliance.
DRAINING THE BASE OF HUMIDIFIER
1
Turn the appliance off by pressing the “ON/OFF” button
and unplug the power cord from the wall outlet.
2
Remove the water tank from the base of the humidier,
lifting it up with the handle.
3
Empty the base of the humidier removing the
accumulated water (as shown in the photo).
Pouring water out in the wrong way may result
in water entering the outlet of the fan and
consequently cause serious damage to the
humidier.
If water gets into the fan outlet, contact your
service center.
E
Between 60-85% RH - the amount of generated steam
is being reduced, on the “MODES” button one operation
indicator shall fade,
Above 85% RH - production of steam shall be ceased ,
the display shows “H% RH”. When the level of humidity
in the room drops to 60% RH, the appliance shall resume
production of steam.
The “MODES” button is used to manually select the
operation mode. When the appliance is started, pressing
a single button will switch from automatic mode to manual
mode, while reducing the amount of generated steam (the
operation indicator on the “AUTO” button and one segment
of the indicator on the “MODES” button shall fade). Pressing
the button again starts the function of sleep and shall reduce
the amount of generated steam (the second segment of
indicator on the “MODES” button will fade and the display
will show the symbol „ ”).
During the sleep function you cannot control
the amount of generated steam. Pressing any
button (except the “ON/OFF”) will disable the
sleep function and increase the amount of
generated steam.
Pressing the “MODES” button shall turn off the sleep function
and increase the amount of generated steam (both segments
of the operation indicator on the “MODES” button will be lit).
The “ION” button is used to activate the ionization. The air
humidier has a built-in generator which produces negative
ions that improve air quality and help to improve your health.
After pressing the “ION” button, the appliance will produce
negative ions, the operation indicator on the button will light
up. At any time you can turn this function off, by pressing
again the “ION” button.
The function of ionization does not work in
sleep mode.
The “AUTO” button lets you switch from manual to
automatic mode, by pressing the button, operation indicator
on the button will light up. To disable the automatic mode,
press the “MODES” button.
STARTING THE APPLIANCE
1
Connect the power cord into an electrical outlet.
The display and operation indicators on the
buttons will turn to illuminate to indicate the
appliance is connected to the supply mains.
2
Press “ON/OFF” button. You will hear the “tune”, air
humidier will run in automatic mode. Operation indicators
on the button “ON/OFF”, “AUTO” and “MODES” will ash
and the display shows the level of humidity in the room.
Do not operate the appliance if the water tank
is empty.
3
To turn the appliance off, press the “ON / OFF” button. The
display and operation indicators on the buttons will be off.
C
52

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer AH1500 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer AH1500 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 2,95 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info