538920
62
Verklein
Vergroot
Pagina terug
1/64
Pagina verder
62
REMOTE CONTROLLER
12. Set on/off time indicator or current time.
13. Preset temperature indicator.
14. Cooling mode: COOL.
15. Dehumidifying mode: DRY.
16. Heating mode: HEAT- inactive in this model
17. Ventilation mode FAN.
18. Mode selection button. Each time you press the button the mode
will change in the following order: COOL, DRY, FAN.
19. TIMER button.
Used to set the time of the automatic switch on / switch off of the
appliance. When pressed together with the HOUR (27) button, al-
lows to set the time in the 1–12 hour range with an hourly break.
20. Keypad HOLD button.
21. FAN SPEED button. Changes the fan speed from HIGH, MED to
LOW.
22. SLEEP button – inactive in this model.
23. HOLD indicator.
24. TEMP button. Each time you press the button the temperature
will change by 1°C.
25. ON/OFF button.
26. MIN button. Used to set the current time in minutes.
27. HOUR button. Used to set the current time in hours and the auto-
matic switch on/switch off time in hours.
28. SWING button. Used to set the air delivery swing mode (left-right)
or the xed direction mode of air delivery.
29. LAMP button – inactive in this model.
30. CLEAN button – inactive in this model.
Technical specication of the remote controller
Rated voltage 3,0 V
Lowest voltage of CPU emitting signal 2,0 V
Signal receiving range 8 m
Setting the current time
Properly insert two AAA batteries in the battery compartment on the back of the remote controller (see picture).
After installing the batteries the remote controller will automatically set the time to: 0:00.
For instruction purposes, the time will be set to 10:15.
1. Press and hold the HOUR (27) for about 3 seconds. The time indicator will begin to ash.
2. Keep pressing the HOUR (27) button until 10 a.m. is set.
3. Press the MIN (26) button, the minute indicator will begin to ash. Keep pressing the button until it is set to 15.
4. Press the ON/OFF (25) button to conrm the set time. The set time will be automatically cancelled if the ON/OFF
(25) button is not pressed within 15 seconds.
AIR CONDITIONER FUNCTIONS
The air conditioner has three functions: COOL, DRY and FAN ventilation.
The temperature range for the cooling mode is from 17°C to 31°C, and for the dehumidifying mode is from 20°C to 31°C.
Power source
Plug the appliance only to a grounded AC socket connected to a protection circuit.
Do not connect the appliance to a multiple socket outlet which is also being used for other electrical appliances.
Insert the plug into a power source. After 2 seconds you will hear a beep. Press the ON/OFF (H) button on the control panel or the ON/
OFF (25) button on the remote controller for the appliance to start operating.
Cooling operation
1. Repeatedly press the MODE (D) button on the control panel or the MODE (18) button on the remote controller and choose the cooling
mode. The LCD display should show the COOL indicator. During the cooling operation always place the air inlet and hot air exhaust hose
outside the room e.g. through an open window.
2. Repeatedly press TEMP+ or TEMP- (C) button on the control panel or the TEMP (24) button on the remote controller to select the de-
sired room temperature at 17 – 31.
3. Press the FAN SPEED (B) button on the control panel or the FAN SPEED (21) button on the remote controller to select the desired fan
speed: HIGH, MED, or LOW.
4. Press the SWING (E) button on the control panel or the SWING (28) button on the remote controller to adjust the air delivery direction.
When the LCD display shows the symbol SWING ; the swing mode is set (left-right). Otherwise the xed direction mode of air delivery
will be set.
The upper and lower swinging ns (4) can be manually adjusted before the start of operation.
ATTENTION: In order to improve the cooling efciency follow the instructions below:
1. Draw the curtains if the room is directly exposed to the sun.
2. Do not place the air conditioner near other heat sources.
Dehumidifying operation
1. Keep the windows and doors closed for an effective dehumidifying operation.
2. Repeatedly press the MODE (D) button on the control panel or the MODE (18) button on the remote controller and choose the dehumidi-
fying mode. The LCD display will show the DRY indicator.
During the dehumidifying mode the fan speed cannot be adjusted. (The FAN SPEED button is inactive).
3. While using the dehumidifying mode the air conditioner can operate without the air outlet hose.
Open
the back cover
62

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer 23Z011 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer 23Z011 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 1,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info