538868
33
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
35
GW17-052_v02
Structure of the kettle (Fig. A)
1
Control light
2
Kettle body
3
Spout
4
Lid release button
5
Lid
6
Handle
7
Water level indicator
8
On/Off (I-0) switch
9
Supplying cord
10
Anti-deposit lter
11
Base
Preparation of the electric kettle for
operation
Before the rst use, wash the kettle inside
(for washing instructions see “Cleaning and
maintenance”),llitwithwateruptothe“max”
level,andletitboilfourtimes(usefreshwater
eachtime)andwashagain.
Operating instructions of the electric kettle
(Fig. B)
1
Press the lid button (4) – the kettle lid will open.
2
Place the lter (10) in the kettle if it was taken out
before.
3
Fill the kettle up with the desired amount of water (the
level is visible on the indicator (7)).
Donotboilthewaterifitisbelowtheminimum
level or beyond the maximum level on the
indicator(7).
4
Close the lid.
5
Place the kettle on the power base (11).
6
Put the plug of the connecting cord into a mains socket
with an earth pin – the upper part of the kettle body will
light up.
7
Turn on the ketttle by pressing the switch button into
position I – the indicator light will come on.
8
The kettle switches off automatically when the water
has reached the boiling point, the lever switch returns to its
starting position – the light comes off.
If further use of the kettle is anticipated, it is not necessary
to remove the plug of the connecting cord from the power
socket.
Becarefulnottollupwithwaterbeyondthe
nominalcapacitywhenpouringwaterintothe
kettle.
The rising of the water level in the kettle is delayed in relation
to the speed of pouring the water. It is caused by the lter
slowing down the speed of the ow. This can be prevented by
pouring the last portions of water extremely carefully before
the water reaches the maximum level on the indicator.
In the event that an empty kettle is switched on, it will be
switched off by a thermal device automatically.
In order to switch the kettle on again after it has cooled down
(approx. 15 minutes), take it off the base, replace it and
switch the kettle on by pressing the lever (8). The cooling
down of the kettle can be accelerated by puring cold water
into the kettle.
Cleaning and maintenance (Fig. C)
Alwayscleanacoldkettle!
1
Remove the plug of the connecting cord from the power
socket.
2
Take out the lter (10).
3
Clean the outside surfaces with a soft cloth moistened
with washing-up liquid.
In order to remove the build-up of hard water lm from the
outside and inside walls of the kettle, wipe them with a cloth
moistened with vineger.
4
Rinse the kettle with fresh water.
Filter replacement – descaling
In the event that scale builds up on the bottom of the kettle,
it needs to be removed. 6% or 10% vinegar is used for this
purpose.
Open the lid
(4).
Take out the lter
(10).
Wash the lter under running water.
Pour in 0.5 l of vinegar and switch on the kettle
(8).
Boil the vinegar and leave in the kettle for about 30
minutes.
Pour the vinegar out and rinse the kettle with fresh
water.
Fill the kettle up with fresh water, boil the water and pour
it out after is has boiled.
Repeat the above procedure if there still is scale on the
bottom.
When the procedure is nished, replace the ter
(10) in
the kettle, following the procedure of taking the lter out
in reverse order.
Negligenceindescalingthekettlemayresults
initsdamage.
33

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Zelmer 17Z013 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Zelmer 17Z013 in de taal/talen: Engels, Pools als bijlage per email.

De handleiding is 1,56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info