596002
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
10 11 12 13 14 15 16 17 18
PIN Code Verication
If the PIN code of your SIM card is enabled, you will need to input the PIN
code when you login at the rst time.
Notes:
The SIM card will be locked if you enter wrong PIN code consecutively for
three times.
If you want to modify the PIN Status, please select Settings > Advanced >
PIN Manage to do the actions.
Quick Settings
After logging in, select Quick Setup, and then the Quick Setup wizard
appears.
The Quick Settings wizard guides you how to set the basic parameters for
your device in the safest way. After this procedure, you can use your Internet
service.
Notes:
The parameter settings may have been preset by your service provider,
and you will enjoy your Internet service directly. Please contact your service
provider for details if you want to do some modication.
WAN Connection
After logging in, select WAN Connection, and you can choose the WAN
Connection Mode according to your requirement.
Settings
After logging in, select Settings, and you can do the following operations.
Select Settings >
3G Settings
View the Wireless Information, select Band Selection
Mode and change APN Setting.
Select Settings >
Wi-Fi Settings
View the current station list, change the basic wireless
network settings, choose security mode and WPA type,
and perform the WPS conguration.
Select Settings >
Firewall
Set the Mac/IP/Port Filtering, Port Forwarding or the
System Security conguration.
Select Settings >
Advanced
View the current status of your device, change the
Administrator Settings, restore factory defaults, manage
PIN or set the LAN interface conguration.
Notes:
Make sure that you can remember the new password if you change the
login password by selecting Settings > Advanced > Management. Please
restore the device to the factory default settings in case you forget the new
password.
Operating your device may interfere with medical devices like hearing
aids and pacemakers. Please always keep them more than 20
centimeters away from such medical devices when they are turned
on. Turn your device off if necessary. Consult a physician or the
manufacturer of the medical device before using your device.
Be aware of the usage limitation when using your device at places such
as oil warehouses or chemical factories, where there are explosive gases
or explosive products being processed. Turn off your device if required.
The use of electronic transmitting devices is forbidden in aircrafts, at
petrol stations and in hospitals. Please observe and obey all warning
signs and switch off your device in these conditions.
Do not touch the inner antenna area if not necessary. Otherwise it will
affect your device’s performance.
Store your device out of the reach of little children. Your device may
cause injury if used as a toy.
Do not touch the metallic parts of your device so as to avoid a burn,
when your device is working.
Using Your Device
Please use original accessories or accessories that are authorized. Using
any unauthorized accessories may affect your device’s performance, and
violate related national regulations about telecom terminals.
Avoid using your device near or inside metallic structures or
establishments that can emit electromagnetic waves. Otherwise it may
inuence signal reception.
Your device is not waterproof. Please keep it dry and store in a shady
and cool place.
Do not use your device immediately after a sudden temperature change.
In such case, it will produce dew inside and outside your device, so don’t
use it until it becomes dry.
Handle your device carefully. Do not drop, bend or strike it. Otherwise
your device will be damaged.
No dismantling by non-professionals and only qualied technicians can
undertake repair work.
3. Select the SSID of your device, and then click Connect. The following
gure is only for your reference.
Notes:
There will be a pop-up window to require the password. Check the label
on your device to gain the SSID and preset password information. Please
do remember the new password when you change the password by
selecting Settings > Wi-Fi Settings > Security after logging in the WebGUI
Conguration Page. You can restore the device to the factory default settings
in case you forget it.
4. Wait a moment, the connection between your device and the client will
be established successfully.
Access the Internet
1. Switch on the device.
2. Establish a connection between your device and the client.
3. After successfully establishing the connection, access the Internet in the
Always On and Manual mode. The default mode is Always On.
Notes:
You can browse the WebGUI Conguration page and click WAN Connection
to set the WAN connection mode.
Disconnect from the Internet
1. Log in the WebGUI Conguration page, and select WAN Connection.
2. Select Manual > Disconnect Internet.
3. Click Apply.
Notes:
Turning off the device can also terminate the internet connection.
SMS
This function allows you to view, send and receive short messages.
After logging in, select SMS, and you can do the following operations.
Select SMS > Device Operate the SMS in your device.
Select SMS > SIM Card Operate the SMS in your SIM card.
Select SMS > New Message Send or save SMS.
Select SMS > SMS Settings Set the SMS conguration.
PhoneBook
This function allows you to store contacts to your device or SIM card.
After logging in, select PhoneBook, and you can add a new contact in Add
New tab, and perform operations to the contact in the Device or SIM Card
tab.
Operating temperature range of 0ºC ~ +35ºC and humidity range of
5% ~ 95% are recommended.
Using Battery
Do not short-circuit the battery, as this can cause excessive heat and
re.
Do not store battery in hot areas or dispose of it in a fire to avoid
explosion.
Do not disassemble or modify the battery.
When not using the battery for a long period, remove it from your device
and store it in a cool dry place.
Never use any charger or battery damaged or worn out.
Return the wear-out battery to the provider or put it in the appointed
recycle place. Do not put it in familial rubbish.
Warning:
If the battery is broken, keep away from it. If it taints your skin, wash your
skin with abundant fresh water and ask doctor help if necessary.
Limited Warranty
This warranty does not apply to defects or errors in the Product caused
by:
i. Reasonable abrasion.
ii. End User’s failure to follow ZTE’s installation, operation or
maintenance instructions or procedures.
iii. End User’s mishandling, misuse, negligence, or improper installation,
disassembly, storage, servicing or operation of the Product.
iv. Modifications or repairs not made by ZTE or a ZTE-certified
individual.
v. Power failures, surges, re, ood, accidents, actions of third parties
or other events outside ZTE’s reasonable control.
vi. Usage of third-party products, or usage in conjunction with third-party
products provided that such defects are due to the combined usage.
vii. Any other cause beyond the range of normal usage intended for the
Product.
Access the WebGUI Conguration Page
1. Make sure the connection between your device and the client is correct.
2. Launch the internet browser and enter http://192.168.0.1 or http://ufi.
home in the address bar.
Notes:
It is recommended that you use IE (7.0 or later), Firefox (2.0 or later), Opera
(10.0 or later), Safari (4.0 or later), Chrome (5.0 or later).
3. The login page appears as follows. The following gure is only for your
reference.
View the information of WAN, WLAN and Device. Input the case-sensitive
default password “admin”, and then click Login to access the WebGUI
Conguration page.
Notes:
Do not put anything on the top of your device. Do not lay devices to
overlap each other when using.
The device takes 1~2 minutes to initialize, and attach to the network.
Usage of WPS
If your client device supports WPS, you need not to input the password
manually after WPS has been available. Please do the following:
1. Start up your device.
2. Launch the client device connected to your device.
3. Enable the WPS function of your device.
4. Enable the WPS function of the client.
Notes:
If the current security mode of the device is OPEN or SHARE, the WPS
function is useless.
For the detailed operations about the client, please refer to the client’s
instruction.
Sleep Mode
When you enable the Wi-Fi function and use the battery to supply power
to the device, once no user connects to the device within 10 minutes or
you press the WPS button, the device will enter the sleep mode, and the
LED screen will be turned off. In the sleep mode, the Wi-Fi function will be
disabled. Press Power or WPS button to wake up the device, and the LED
screen will be turned on.
Notes:
With USB connection if no Wi-Fi user connects to the device within 10
minutes, only the Wi-Fi function will be disabled. Hold the WPS button about
3 seconds to enable this function.
Warning and Notice
To the Owner
Some electronic devices are susceptible to electromagnetic interference
sent by your device if inadequately shielded, such as the electronic
system of vehicles. Please consult the manufacturer of your device
before using if necessary.
End User shall have no right to reject or return the Product, or receive a
refund for the Product from ZTE under the above-mentioned situations.
This warranty is End User’s sole remedy and ZTE’s sole liability for
defective or nonconforming items, and is in lieu of all other warranties,
expressed, implied or statutory, including but not limited to the implied
warranties of merchantability and tness for a particular purpose, unless
otherwise required under the mandatory provisions of the law.
Limitation of Liability
ZTE shall not be liable for any loss of prots or indirect, special, incidental or
consequential damages resulting from or arising out of or in connection with
using of this product, whether or not ZTE had been advised, knew or should
have known of the possibility of such damages, including, but not limited to
lost prots, interruption of business, cost of capital, cost of substitute facilities
or product, or any downtime cost.
How to Get Help
You can get help by:
Sending E-mail to mobile@zte.com.cn
Visiting http://www.zte.com.cn
Calling Service Hotline: +86–755–26779999
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw ZTE MF-62 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van ZTE MF-62 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,5 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info