669695
78
Verklein
Vergroot
Pagina terug
1/83
Pagina verder
Yuneec Electric Aviation
H520 Start Guide
78
BATTERY CHANGES DURING MISSION
If a battery change is required during a planned mission, the H520 will automatically execute a RTL and
land. Once the H520 has landed, remove the depleted battery and replace with a charged battery. Wait
for the H520 to establish a connection with the ST16S and GPS lock.
Once both signals have been locked, a ‘Resume Mission’ slider will appear on the bottom of the Fly
view. Slide the arrow to confirm resuming the mission. Ensure the launch area is clear of personnel,
equipment and obstacles, prior to sliding the ‘Resume Mission’ slider.
ENDING A MISSION
Once the H520 has landed after completing a mission, a pop-up window will appear on the right side of the
DataPilot™ Home Screen. This window will ask if the Pilot would like to leave the mission on the H520 or
remove the mission from the H520. Selecting to remove the mission will delete the current mission from
the aircraft’s memory. Uploading a new mission will overwrite the current mission on the H520.
REFLY A MISSION
After completing a mission, if the mission requires re-flight, tap on the first waypoint (to reset the current
mission item), and then tap ‘Start Mission’ under the Action button menu. The mission will begin again from
the beginning. Similarly, if the Pilot wants to resume the mission from a certain waypoint, he can select that
waypoint, and then choose ‘Start Mission’ as above.
REMOVING A MISSION
To remove the current mission on the H520, either upload a new mission or select ‘Remove All’ from the
Sync button in the Plan panel. Turning off the power to the aircraft and restarting will not remove the
mission.
GEAR SWITCH
In mission mode, the landing gear will automatically retract after reaching takeoff altitude. After the
mission is complete and a RTL is triggered, the landing gear will continue to stay up until it reaches the home
position. The landing gear will come down prior to descending from the RTL altitude. To deploy the landing
gear after exiting Mission mode, the Pilot may need to cycle (flip up and down) the landing gear switch to
activate the switch. However, in Angle and Manual flight mode, the gear switch will respond correctly to
the selected position.
Note:
The aircraft may take up to two minutes to reconnect.
Note:
During RTL after mission complete, the Pilot may need to
cycle (flip up and down) the
landing gear switch twice to bring down the landing gear.
78

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yuneec H520 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yuneec H520 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,15 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Yuneec H520

Yuneec H520 Snelstart handleiding - Deutsch - 46 pagina's

Yuneec H520 Aanvulling / aanpassing - Deutsch - 13 pagina's

Yuneec H520 Gebruiksaanwijzing - Deutsch - 84 pagina's

Yuneec H520 Snelstart handleiding - English - 46 pagina's

Yuneec H520 Aanvulling / aanpassing - English - 13 pagina's

Yuneec H520 Snelstart handleiding - Français - 46 pagina's

Yuneec H520 Aanvulling / aanpassing - Français - 13 pagina's

Yuneec H520 Gebruiksaanwijzing - Français - 82 pagina's

Yuneec H520 Snelstart handleiding - Italiano, Português, Espanõl - 46 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info