540486
170
Verklein
Vergroot
Pagina terug
1/174
Pagina verder
<INSTALLATION AND OPERATING PRECAUTIONS FOR TIIS FLAMEPROOF EQUIPMENT>
3
IM 01F06A00-01EN
6. Maintenance of Flameproof Apparatus
To maintain the ameproof apparatus, do the
following. (For details, refer to Chapter 10
“MAINTENANCE OF EXPLOSION-PROTECTED
ELECTRICAL INSTALLATION” in the USER’S
GUIDELINES for Electrical Installations for
Explosive Gas Atmospheres in General Industry.)
(1) Maintenance servicing with the power
on.
Flameproof apparatus shall not be maintenance-
serviced with its power turned on. However, in
cases where maintenance servicing is to be
conducted with the power turned on, with the
equipment cover removed, always use a gas
detector to check that there is no explosive gas
in that location. If it cannot be checked whether
an explosive gas is present or not, maintenance
servicing shall be limited to the following two items:
(a) Visual inspection
Visually inspect the ameproof apparatus,
metal conduits, and cables for damage or
corrosion, and other mechanical and structural
defects.
(b) Zero and span adjustments
These adjustments should be made only to
the extent that they can be conducted from the
outside without opening the equipment cover.
In doing this, great care must be taken not to
cause mechanical sparks with tools.
(2) Repair
If the ameproof apparatus requires repair, turn
off the power and transport it to a safety (non-
hazardous) location. Observe the following points
before attempting to repair the apparatus.
(a) Make only such electrical and mechanical
repairs as will restore the apparatus to
its original condition. For the ameproof
apparatus, the gaps and path lengths of joints
and mating surfaces, and mechanical strength
of enclosures are critical factors in explosion
protection. Exercise great care not to damage
the joints or shock the enclosure.
(b) If any damage occurs in threads, joints
or mating surfaces, inspection windows,
connections between the sensor and
terminal box, shrouds or clamps, or external
wiring connections which are essential in
ameproofness, contact Yokogawa Electric
Corporation.
CAUTION
Do not attempt to re-process threaded
connections or re nish joints or mating surfaces.
(c) Unless otherwise speci ed, the electrical
circuitry and internal mechanisms may be
repaired by component replacement, as this
will not directly affect the requirements for
ameproof apparatus (however, bear in mind
that the apparatus must always be restored to
its original condition). If you attempt to repair
the ameproof apparatus, company-speci ed
components shall be used.
(d) Before starting to service the apparatus, be
sure to check all parts necessary for retaining
the requirements for ameproof apparatus.
For this, check that all screws, bolts, nuts, and
threaded connections have properly been
tightened.
(3) Prohibition of speci cation changes
and modi cations
Do not attempt to change speci cations or make
modi cations involving addition of or changes in
external wiring connections.
7. Selection of Cable Entry Devices for
Flameproof Type
IMPORTANT
The cable glands (cable entry devices for
ameproof type) conforming to IEC Standards
are certi ed in combination with the ameproof
apparatus. So, Yokogawa-speci ed cable entry
devices for ameproof type shall be used to meet
this demand.
References:
(1) Type Certi cate Guide for Explosion-Protected
Construction Electrical Machinery and
Equipment (relating to Technical Standards
Conforming to International Standards), issued
by the Technical Institution of Industrial Safety,
Japan
(2) USER’S GUIDELINES for Electrical
Installations for Explosive Gas Atmospheres
in General Industry (1994), issued by the
Japanese Ministry of Labour, the Research
Institute of Industrial Safet
170

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yokogawa DYA Vortex Flow Converter bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yokogawa DYA Vortex Flow Converter in de taal/talen: Engels als bijlage per email.

De handleiding is 5,84 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info