779793
12
Verklein
Vergroot
Pagina terug
1/15
Pagina verder
22 23
OPERATION
NOTE: This battery pack has been shipped in a low charge condition. It should be
fully charged before rst use. Make sure the mains voltage is the same as rating label
which is located on the charger.
WARNING: The charger and battery pack are specically designed to work together
so do not attempt to use any other devices. Never insert or allow metallic objects into
your charger or battery pack connections because an electrical failure and hazard will
occur. The battery needs to be fully charged before rst use and whenever it fails to
produce sufcient power on jobs that were easily done before.
This product comes with a lithium-ion battery pack.The lithium-ion battery will not lose charge
when not in use and will not lose charging capacity over time, however to maintain optimum
battery life it is recommended to charge the battery when empty or running low.
Connecting the charger to mains
1. Plug the charger into an appropriate power supply. The LED lights green to tell you that
the charger is ready for use.
2. To insert the battery pack into the charger, align the battery pack with the corresponding
receptacle on the charger, push the battery pack downward until it has been locked in
place.
3. The battery pack will be fully charged 90 minutes and the green LED will light up to let
you know that the battery is fully charged.
Important charging notes
Longest life and best performance can be obtained if the battery pack is charged when the
air temperature is between 18-24°C. Do not charge the battery pack in a very low or very high
air temperature. This is important and will prevent serious damage to the battery pack.
- When using your tool continuously, the batteries in your battery pack will become
hot. You should let a hot battery pack cool down for approximately 30 minutes before
attempting to recharge.
- The charger and battery pack may become warm to touch while charging. This is
normal, and does not indicate a problem.
- Use the charger in normal room temperature whenever possible. To prevent overheating,
do not cover the charger and do not charge battery packs in direct sunlight or near heat
sources.
- If the battery pack does not charge properly:
1. Check the main socket by plugging in a lamp or other appliance.
2. Move the charger and battery pack to a location where the surrounding air
temperature is approximately 18-24°C.
3. If charging problems persist, contact your local service center.
- The battery pack should be recharged when it fails to produce sufcient power on jobs
which were easily done previously. DO NOT CONTINUE to use under these conditions.
- Follow the charging procedure. You may also charge a partially used pack whenever you
desire with no adverse effect on the battery pack.
- Under certain conditions, with the charger plugged in to the power supply, the exposed
charging contacts inside the charger can be shorted by foreign material. Foreign
materials of a conductive nature such as, but no limited to, steel wool, aluminum foil,
or any buildup of metallic particles should be kept away from charger cavities. Always
OPERATION
unplug the charger from the power supply when there is no battery pack in the cavity.
Unplug charger before attempting to clean.
- Do not immerse charger in water or any other liquid.
WARNING: Do not allow any liquid to get inside charger. This will increase the risk
of electric shock. To facilitate the cooling of the battery pack after use, avoid placing
the charger or battery pack in a warm environment such as in a metal shed or an un-
insulated trailer.
CAUTION: Never attempt to open the battery pack for any reason. If the plastic
housing of the battery pack breaks or cracks, return to a service center to be
recycled; do not continue to use.
Checking the battery capacity (Fig. H)
Push the power indicator button, the remaining percentage of battery capacity will show on
screen.
Setting cutting height (Fig. I)
If you wish to change the cutting height, push the adjusting lever rst to make it out of the
tooth and then push the lever to the desired position.
WARNING:
Never operate the adjusting handle roughly.
Removing and inserting the battery pack
Insert the battery pack. (Fig. J)
Align the battery pack with its compartment of the tool. Push the battery pack into the tank
until you hear a click. This means the battery pack has been locked in position, then close the
battery pack tank cover.
Removing the battery pack from the tool (Fig. K)
Open the battery pack tank cover. Pull the battery pack release button, the battery pack will
come out automatically.
NOTE: Safety-Key (Fig. L)
This lawnmower is tted with a safety key; this prevents the accidental start up of your
cordless lawnmower.
The safety key has been designed to totally disable the lawnmower when it is removed.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yardforce LM G37 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yardforce LM G37 in de taal/talen: Engels als bijlage per email.

De handleiding is 4.1 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info