516956
2
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
Installation Connection Settings Playback
Carrying out AUTO SETUP for appropriate surround effects
The IntelliBeam technology allows you to achieve sound adjustments that best match your listening environment. It is normal for loud
test tones to be output during the AUTO SETUP procedure. Make sure that there are no children around in the listening room while the
AUTO SETUP procedure is in progress.
1.
Place the IntelliBeam microphone at your normal listening position.
Assemble the cardboard microphone stand and place the IntelliBeam microphone on top of it horizontally as shown below.
Use the supplied cardboard microphone stand to place the IntelliBeam microphone at the same height as your ears would be when you
are seated.
Make sure that there are no obstacles between the IntelliBeam microphone and the walls in your listening room as these objects obstruct
the path of sound beams.
4.
Connect the IntelliBeam microphone to the INTELLIBEAM MIC jack on the rear of the unit.
2.
Press the key on the remote control.
The power of this unit turns on.
3.
Turn the TV on and switch the TV’s input to
display video content from this unit.
When this unit is connected to the HDMI input on the TV (as
shown in “Connecting a TV and a Blu-ray disc player” in this
Quick Reference Guide), switch the TV’s input to “HDMI1”.
You can select the language for the menu display.
Press and hold the SETUP key until the “OSD LANGUAGE”
menu appears. Press the S/T key to select the desired
language. Press the SETUP key again to exit the setup menu.
12345
Remove
Fit in
Fit in
Place horizontally
Run
through
IntelliBeam microphone Upper limit
Center height of
this unit
Within 1 m (3.3 ft)
Within 1 m (3.3 ft)
Listening
position
Cardboard
microphone stand
1.8 m (6.0 ft)
or more
Lower limit
Center
line
IntelliBeam
microphone
Cardboard microphone stand
yTip
AUTO SETUP
(PREPARATION & CHECK)
Please connect the MIC.
Please place the MIC at least
1.8m/6ft away from Sound Pro-
jector. The MIC should be set
at ear level when seated.
Measurement takes about 3min.
After [ENTER] is pressed,
please leave the room.
[ENTER]:Start [RETURN]:Cancel
IntelliBeam microphone (supplied)
Cardboard microphone stand (supplied)
5.
Make sure that your listening room is as quiet as possible.
For accurate measurement, turn off air conditioner or other devices that make noises.
Follow the instructions below and then leave the room. If you remain in the room, you may obstruct the beam, or the microphone may
pick up any sounds you make, possibly resulting in improper configuration of settings.
When leaving the room, bring this Quick Reference Guide with you. The AUTO SETUP procedure takes about 3 minutes. Wait outside
the room during the AUTO SETUP procedure.
To cancel the AUTO SETUP procedure after it is started, press the RETURN key on the remote control.
6.
Press the ENTER key to start the AUTO
SETUP procedure and then leave the room
within 10 seconds.
The screen automatically changes during the AUTO
SETUP procedure.
If the AUTO SETUP procedure is complete, this unit rings
the chimes and the results will be displayed on the TV.
If “ENVIRONMENT CHECK:Failure” is displayed, see
page 27 of the Owner’s Manual and run the measurement
process again.
The results displayed depend on the position of the
unit.
If you hear a buzzer sound and an error message
appears on the TV, look for a solution in “If an error
message is displayed” on page 27 of the Owner’s
Manual. Then press the RETURN key to run the
measurement process again.
7.
Press the ENTER key.
Measurement results are applied to this unit.
You can save the several measurement results
pressing the SYSTEM MEMORY key (see page 28 of
the Owner's Manual).
8.
Remove the IntelliBeam microphone.
Keep the IntelliBeam microphone in a safe place.
The settings are automatically saved in the system
memory.
Note
Will begin in 10 sec.
Please leave the room
----------
AUTO SETUP START
[RETURN]:Cancel
(After 3 min.)
ENVIRONMENT CHECK: Success
BEAM MODE: 5Beam/Plus2
SHOW RESULT
MESUREMENT COMPLETE.
[ENTER]:Save set-up.
[RETURN]:Do not save set-up.
yTips
AUTO SETUP COMPLETE
Please remove the MIC
from Sound Projector
and the listening position.
Press [SYSTEM MEMORY] key
to save set-up in the memory.
Installation Connection Settings Playback
Playing back
Confirm that this unit and other audio/video devices are properly connected by playing a DVD or BD on the Blu-ray disc player. The following
explains the playback procedure when this unit, TV, and Blu-ray disc player are connected as shown in “Connecting a TV and a Blu-ray disc
player” in this Quick Reference Guide.
Enjoying TV in surround sound
1.
Press the key to turn on this unit.
2.
Turn on your TV and Blu-ray disc player connected to this
unit.
3.
Press the HDMI1 key to select the Blu-ray disc player as the
input source.
4.
Switch the TV’s input to HDMI 1.
5.
Play back a DVD or BD on the Blu-ray disc player.
6.
Press the VOLUME (+/-) key to adjust the volume.
Use TV remote control to mute the sound from TV.
7.
Press the SURROUND key and then the CINEMA DSP keys
to set your sound preferences.
When this unit does not play back, check the following
The connection between this unit and Blu-ray disc player.
The audio output settings of Blu-ray disc player is set to digital sound output.
The TV’s input is switched to this unit.
6
1
7
3
HDMI1
Input source name
yTip
yTips
1.
Select the desired TV channel.
2.
Press the TV key.
HDMI control function
You can use the TV remote control to operate this unit if your
TV supports the HDMI control function. See page 31 of the
Owner’s Manual.
yTip
FM tuning (YSP-4300 only)
Playing music stored on an iPod via YIT-W12TX
Playing music stored on a computer via YIT-W12TX
Playing music stored on an iPod or USB device over a USB connection (YSP-4300 only)
For detailed operation, refer to the Owner’s Manual on the supplied CD-ROM.
1.
Press the FM key.
2.
Press the TUNING / key to specify the
frequency.
For details of YIT-W12TX, refer to “Safety and
Accessory Information” (separate booklet).
1.
Connect YIT-W12TX to the iPod.
2.
Start playback of music stored on the iPod.
For details of YIT-W12TX, refer to “Safety and
Accessory Information” (separate booklet).
1.
Connect YIT-W12TX to the computer via the
USB cable for YIT-W12TX.
2.
Play music stored on the computer.
USB
Connect the iPod to the USB jack on the front
of this unit using the USB cable supplied with
the iPod.
For more information on playing music stored on the iPod,
refer to “Playing music stored on an iPod or USB device over
a USB connection” in the Owner's manual.
Connect a USB device to the USB jack on the
front of this unit.
For more information on playing music stored on USB device,
refer to “Playing music stored on an iPod or USB device over
a USB connection” in the Owner's manual.
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha YSP-3300 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha YSP-3300 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,7 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Yamaha YSP-3300

Yamaha YSP-3300 Aanvulling / aanpassing - Nederlands - 2 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Nederlands - 35 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Nederlands - 82 pagina's

Yamaha YSP-3300 Aanvulling / aanpassing - Deutsch - 2 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Deutsch - 82 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Deutsch - 35 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - English - 82 pagina's

Yamaha YSP-3300 Aanvulling / aanpassing - English - 2 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - English - 35 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Français - 82 pagina's

Yamaha YSP-3300 Aanvulling / aanpassing - Français - 2 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Français - 35 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Italiano - 82 pagina's

Yamaha YSP-3300 Aanvulling / aanpassing - Italiano - 2 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Italiano - 35 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Espanõl - 82 pagina's

Yamaha YSP-3300 Aanvulling / aanpassing - Espanõl - 2 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Espanõl - 35 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Svenska - 82 pagina's

Yamaha YSP-3300 Aanvulling / aanpassing - Svenska - 2 pagina's

Yamaha YSP-3300 Gebruiksaanwijzing - Svenska - 35 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info