516937
101
Verklein
Vergroot
Pagina terug
1/126
Pagina verder
En 101
Changing the remote control ID of the remote control
Perform each of the following steps within 1 minute. Otherwise, the setting will be
automatically canceled.
1
Press CODE SET on the remote control using a pointed object such as the tip of a
ballpoint pen.
2
Press SOURCE/RECEIVER.
3
Use the numeric keys to enter “5019” (ID1) or “5020” (ID2).
Once the remote control ID is registered successfully, SOURCE/RECEIVER blinks twice.
If it blinks 6 times, registration failed. Repeat from step 1.
The registered remote control codes (p.103) are not cleared even if you change the remote control ID.
Changing the frequency step setting (TU)
(Asia and General models only)
Change the frequency step setting of this unit depending on your listening environment.
Settings
Switching the video signal type (TV FORMAT)
Switch the video signal type of this unit so that it matches to the format of your TV.
Settings
NTSC, PAL
Default
General model: NTSC
Other models: PAL
Removing the limitation on HDMI video output
(MON.CHK)
This unit automatically detects resolutions supported by a TV connected to the HDMI
OUT jacks.
If you want to select a resolution in “Resolution” (p.92) regardless of the detection
results or if this unit does not detect it correctly, disable the monitor check function.
Settings
In case this unit becomes inoperable because videos from this unit cannot be displayed on the TV after
“MON.CHK” is set to “SKIP”, reset the setting to “YES”.
Restoring the default settings (INIT)
Restores the default settings for the selected item.
Choices
FM100/AM10
Select this when you want to adjust the FM frequency by 100-kHz steps and
AM by 10-kHz steps.
FM50/AM9
(default)
Select this when you want to adjust the FM frequency by 50-kHz steps and
AM by 9-kHz steps.
STEREO
VOL.
TUNED
SW
C
LR
SL SR
SBL SBR
TU-FM50/AM9
PRESET
TVFORMAT-
PAL
YES (default)
Enables the monitor check function. (Outputs video signals with a
resolution supported by the TV only.)
SKIP
Disables the monitor check function. (Outputs video signals with a
specified resolution regardless of compatibility with the TV.)
VIDEO Restores the default settings for video configurations.
ALL Restores the default settings for this unit.
CANCEL Does not perform an initialization.
MON.CHK-YES
INIT-CANCEL
101

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yamaha-RX-V671

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha RX-V671 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha RX-V671 in de taal/talen: Engels als bijlage per email.

De handleiding is 11,71 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Yamaha RX-V671

Yamaha RX-V671 Snelstart handleiding - Nederlands - 8 pagina's

Yamaha RX-V671 Gebruiksaanwijzing - Nederlands - 126 pagina's

Yamaha RX-V671 Gebruiksaanwijzing - Deutsch - 126 pagina's

Yamaha RX-V671 Snelstart handleiding - Deutsch - 8 pagina's

Yamaha RX-V671 Snelstart handleiding - English - 8 pagina's

Yamaha RX-V671 Snelstart handleiding - Français - 8 pagina's

Yamaha RX-V671 Gebruiksaanwijzing - Français - 126 pagina's

Yamaha RX-V671 Gebruiksaanwijzing - Italiano - 126 pagina's

Yamaha RX-V671 Snelstart handleiding - Italiano - 8 pagina's

Yamaha RX-V671 Gebruiksaanwijzing - Espanõl - 126 pagina's

Yamaha RX-V671 Snelstart handleiding - Espanõl - 8 pagina's

Yamaha RX-V671 Gebruiksaanwijzing - Svenska - 126 pagina's

Yamaha RX-V671 Snelstart handleiding - Svenska - 8 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info