657608
60
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
88 - English English - 89
37
TROUBLESHOOTING
Symptom Check Action
The speedometer
displays “Er”.
There could be a problem inside the
Drive Unit is malfunctioning.
Turn on the power to the display unit and
then leave it alone for 5 minutes. All
indicators will turn off automatically.
Turn the power on again.
The assist mode
indicator and battery
capacity indicator
flash rapidly
alternately.
The display unit shuts
down immediately
(approx. 4 seconds
later) after switching
the power on.
Are the bicycle’s battery
pack connection
terminals dirty?
Remove the battery pack, clean the
bicycle’s terminals with a dry cloth or
cotton swab, and then install the battery
pack again.
Traveling range has
decreased.
Are you fully charging
the battery pack?
Charge the battery pack until full (F).
Are you using the
system under low-
temperature
conditions?
Normal traveling range will be restored
when the ambient temperature rises.
Additionally, storing the battery pack
indoors (in a warm location) before use
will improve traveling range under cold
conditions.
Is the battery pack worn
out?
Replace the battery pack.
The assist mode
indicators are
flashing.
These indicators will flash when the
speed sensor is unable to detect a
correct signal.
Turn off the power to the display unit and
then turn it on again, select the assist
mode and then ride for a short distance.
Also, make sure the magnet is mounted
correctly on the spokes of the wheels.
38
TROUBLESHOOTING
Running assist function
Symptom Check Action
The running assist
function does not
work.
When you press the running assist
switch once, the running assist indicator
will come on for five seconds.
Press and hold the running assist switch
again while the running assist indicator
is still lit.
The running assist
function turns off.
Did the tires lock for a
few seconds?
Remove your finger from the running
assist switch for a moment, and then
operate the running assist function
again.
Did you pedal while the
running assist function
was running?
Take your feet off the pedals, and remove
your finger from the running assist
switch for a moment, and then operate
the running assist function again.
Power supply of external devices via USB connection
Symptom Check Action
Power is not supplied.
Is the display unit’s
power on?
Press the power switch on the display
unit to turn the power on.
Is the USB version
correct?
Use an external device that complies
with USB 2.0.
Is the USB cable firmly
connected?
Re-connect the USB cable.
Is the USB receptacle
or USB plug terminal
dirty or wet?
Disconnect the USB cable from the
display unit and external device. Remove
the dirt and water on the USB receptacle
and USB plug terminal and re-connect
the cable.
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha PW45 - Speed Pedelec - Speed EPAC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha PW45 - Speed Pedelec - Speed EPAC in de taal/talen: Duits, Engels, Frans als bijlage per email.

De handleiding is 4,16 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info