555607
3
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
2En
English
CONNECTIONS
Youneedacommerciallyavailablespeakercable.
y
Thesizeand/ormaterialofaspeakercableaffectsonthe
soundquality.Therefore,werecommendyoutopurchase
ahigh-qualityspeakercabletoexerttheperformanceof
thisunit.
Notes
• Connect the (+) terminals on the amplier and the
speaker using one side of the cable. Connect the
(–) terminals on both components using the other
side of the cable.
• Connect the speaker to the center terminals of your
amplier, making sure not to reverse the polarity
(+, –). If the speaker is connected with reversed
polarity, the sound will be unnatural and lack bass.
• When using an amplier with a rated output power
higher than the nominal input power of the speaker,
care should be taken never to exceed the speakers
maximum input.
• The speaker may be damaged if certain sounds
are continuously output at high volume level.
For example, if sine waves from a test disc, bass
sounds from electronic instruments, etc., are
continuously output, or when the stylus of a
turntable touches the surface of a disc, reduce the
volume level to prevent the speaker from being
damaged.
• Please refer to the owners manual that came with
your amplier or receiver.
How to connect:
1 Loosentheknob.
2 Remove15mm(5/8”)ofinsulationfromeachendof
thecables,andtwisttheexposedconductorstogether
neatlyandtightly,asshownbelow.
15 mm
(5/8")
3 Insertthebarewireintothehole.
4 Tightentheknobandsecurethecable.
5 Testthermnessoftheconnectionbypullinglightlyon
thecableattheterminal.
Notes
• Do not let the bare speaker wires touch each other
as this could damage the speaker or the amplier,
or both of them.
• Do not insert the insulation coating into the hole.
The sound may not be produced.
When using a banana plug
1
Unscrewtheterminalknob.
2 Removethecoverbypullingittowardyou.
1
2
Banana plug
CONNECTION TO YOUR AMPLIFIER
Before making connection, make sure that the amplifier is switched off.
CENTER
+
Amplifier
NS-C901
Tighten
Black (–)
Red (+)
Loosen
Insulation coating
Bare wire
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha NS-C901 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha NS-C901 in de taal/talen: Duits, Engels, Frans, Spaans als bijlage per email.

De handleiding is 1,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info