18179
30
Verklein
Vergroot
Pagina terug
1/33
Pagina verder
E-29
GETTING STARTED
PLAYBACK
RECORDING
ADDITIONAL
INFORMATION
ENGLISH
.................................................. ADDITIONAL INFORMATION
Display Messages
Cant Copy
Digital recording cannot be performed. (See SCMS
copy protection on page 28.)
Check Disc
This is displayed when the recorder stops after reading
disc information, while performing an erase procedure,
finalization, or OPC. If this occurs, the disc may be dirty
or possibly even damaged. Remove the disc and
inspect it.
Close
The disc tray is being closed.
Data Track
This is displayed when the data track is played back.
Disc Full
Recording is not possible because there is no blank
space remaining on the disc.
Erase ALL?
Erases all tracks on a CD-RW disc.
If you want to erase all tracks, press w/d (w on the
remote).
Erase DISC?
Erases all of the information a CD-RW disc.
If you want to erase all of the information, press w/d (w
on the remote).
Erase LAST?
Erases the last track on a CD-RW disc.
If you want to erase the last track, press w/d (w on the
remote).
Erase TOC?
Erases the TOC (Table Of Contents) on a CD-RW disc.
If you want to erase the TOC, press w/d (w on the
remote).
Finalize?
Finalizes the CD.
If you want to finalize the disc, press w/d (w on the
remote).
Finalized
Recording has been attempted on a CD-RW disc that
has already been finalized.
Finalizing
During the finalization process, the TOC (Table Of
Contents) is being written onto the disc.
New Disc
The disc in the disc tray is either a new CD-R or CD-RW
disc or a CD-RW disc that has been erased using the
Erase ALL or Erase DISC function.
No Disc
There is no disc on the disc tray.
No Input
The digital input is selected, but the connections are not
correct, or the digital signal is not being output from the
source device. Please check all cabling, and the status
of the source device.
Not Audio
The inserted disc is not an audio CD-R or CD-RW disc.
This is displayed when REC, FINALIZE, or ERASE is
pressed.
OPC Adjust
Adjustments performed when OPC (Optimum Power
Calibration) optimizes the laser power to the reflectivity
of the disc. Some time is required to complete these
automatic adjustments.
Open
The disc tray is being opened.
Reading
When the recorder is turned on or a disc is loaded, the
recorder reads the format of the disc loaded in the
recorder.
Standby
This unit has been put in the standby mode.
TEXT Save?
This is displayed if you attempt to open the disc tray
without performing finalization after CD TEXT data is
copied or edited.
Track Full
Recording is not possible because the maximum
number of 99 tracks has already been recorded on the
disc.
Wait
The recorder has been put in the stop mode from the
record mode and information is being written to the PMA
(Program Memory Area). Never turn the power off when
this is displayed.
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yamaha CDRD651 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yamaha CDRD651 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,52 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Yamaha CDRD651

Yamaha CDRD651 Gebruiksaanwijzing - Nederlands, Deutsch, English, Français, Italiano, Espanõl, Svenska - 219 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info