655218
17
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
17
Troubleshooting
9
External Siren
Siren produces a 3 second alarm
when disarmed
There has been a previous alarm and there might be an
intruder still in the premises.
Siren produces a series of audible pips when
armed or disarmed
If the Siren produces a series of pips when arming and
disarming this indicates low batteries.
If the Siren produces a series of pips only when arming this
indicates a tamper fault. Check that the Siren cover is rmly
secured and the tamper spring on the back of the Siren
is fully depressed when in contact with the wall. If not use
suitable packing material to ll the gap (refer to page 9 for
diagram).
Siren produces an interrupted tone when sounding
an alarm
The Siren has low batteries. Change batteries with new
alkaline replacements (see page 15).
External Siren
Siren does not respond to Arming or Disarming
Siren batteries are completely exhausted. See instructions
for changing batteries on page 15.
Siren not learnt-in. If Siren produces a tamper alarm when
the cover is removed and Siren is OK, learn-in the Siren (see
page 7).
• Siren is not in range of the Smart Hub.
If you experience a problem with adding the
External Siren to you Alarm system
Ensure the dip switch positions are as shown in the diagram.
If the switches are in the wrong position, please change
accordingly
• After changing the dip switch, turn o the power for 30
seconds, then turn the power on again for the changes to
take eect.
Door/Window Contact
Door/Window Contact LED lights up
Batteries are low or the tamper switch has been disturbed.
Check that the tamper switch spring is making contact with
the mounting surface. If the tamper switch is OK, please
change the battery (see page 15).
Door/Window Contact does not respond to opening
when jumper is in the test position
Batteries are completely exhausted. Change battery
(see page 15).
The magnet is too far away from the Door/Window Contact.
Check that the gap between the Door/Window Contact and
magnet is not greater than 10mm.
PIR Motion Detector
PIR does not respond to motion
Previous motion has triggered the PIR sleep timer and is
preventing subsequent motion detection. Arm the system
and vacate protected area for at least 90 seconds before
testing. By pressing the learn/test button the PIR LED will
light up and detect motion for the rst minute.
PIR Motion Detector is slow to respond
This is normal, the PIR Motion Detector has sophisticated
false alarm ltering that will lter out random uctuations and
responds to genuine motion across eld of view, it is less
sensitive walking directly towards it.
PIR Motion Detector gives false alarms
• Check pets have no access to the protected area.
Check that the PIR Motion Detector is not pointed at sources
of heat or moving objects, e.g. uttering curtains.
Check that the PIR Motion Detector is not mounted above
convector heaters or pointing directly at windows.
17

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yale SR320 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yale SR320 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,98 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info