674747
83
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Page 81
FT
DX
1200 OPERATING MANUAL
CW SPOTTING
(
ZERO-BEATING
)
“Spotting” ]eroing in on another CW station) is a handy techniTue to ensure you and the other station are precisely on
the same freTuency.
The Tuning 2ffset Indicator in the display may also be moved so you can adjust your receiver freTuency to center the
incoming station on the pitch corresponding to that of your transmitted signal.
Using the Auto Zeroing System
2nly when the optional FFT unit is installed)
3ress the
[
S
/
T
/
W
/
X
]
button to select the
ZIN/
SPOT
”. 3ress the
[
SELECT
]
switch momentarily to
adjust the receiving freTuency to the ]ero-in automati-
cally while receiving the CW signal.
Using the SPOT System
3ress the
[
S
/
T
/
W
/
X
]
button to select the
ZIN/
SPOT
”. 3ress the
[
MONI
]
button, then while pressing
the front panel
[
SELECT
]
button, the Spot tone will be
heard through your speaker. This tone corresponds to the
pitch of your transmitted signal. If you adjust the receiv-
er freTuency until the pitch of the received CW signal
matches that of the Spot tone, your transmitted signal
will be precisely matched to that of the other station.
5elease the
[
SELECT
]
button to turn the Spot tone off.
A
DVICE:
In a tough '; pile-up, you may actually want to
use the S32T system to ¿nd a “gap” in the spread
of calling stations, instead of ]eroing in precisely
on the last station being worked by the '; station.
From the '; side, if a do]en or more operators also
using Yaesu’s S32T system) all call precisely on the
same freTuency, their dots and dashes merge into a
single, long tone that the '; station cannot decipher.
In such situations, calling slightly higher or lower in
freTuency may get your call through.
The Tuning 2ffset Indicator in the display may be
utili]ed for CW freTuency adjustment, as well. Its
con¿guration is set via 0enu item “
011 BAR DIS-
PLAY SELECT
” at the factory, and the Tuning 2ffset
Indicator is already set to the “
CW TUNE
” selection.
Q
UICK POINTS:
The CW Spotting process utili]es the Spot tone or
the Tuning 2ffset Indicator. The actual offset pitch
is set by 0enu item “
056 CW PITCH
”. The offset
pitch may be set to any freTuency between 300 H]
and 100 H], in 0 H] steps. You can either match
tones audibly using the
[
SELECT
]
button) or tune
the receiver freTuency so that the central red marker
on the Tuning 2ffset indicator lights up. 1ote that
there are 31 “dots” on the Tuning 2ffset Indicator,
and depending on the resolution selected, the incom-
ing CW signal may fall outside the visible range of
the bar indicator, if you are not reasonably close to
the proper alignment of tones.
CW CONVENIENCE FEATURES
The displayed freTuency on CW normally reflects
the “]ero beat” freTuency of your offset carrier. That
is, if you were to listen on USB on 14.100.00 0H]
to a signal with a 700 H] offset, the “]ero beat” fre-
Tuency of that CW carrier would be 14.100.70 0H]
the latter freTuency is what the
FT
DX
1200
displays,
by default. However, you can change the display to
be identical to what you would see on SSB by using
0enu item “
066 CW FREQ DISPLAY
” and setting
it to “
DIRECT FREQ
” instead of the default “
PITCH
OFFSET
” setting.
[
SELECT
]
Button
[
MONI
]
Button
ZIN/SPOT Indicator
Retune: Shift to Higher Frequency
Retune: Shift to Lower Frequency
Zero-In
83

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FTDX1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FTDX1200 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info