674747
67
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Page 65
FT
DX
1200 OPERATING MANUAL
The $utomatic $ntenna Tuner hereinafter referred to as the “$TU”) built into each
FT
DX
1200
is designed to ensure a
0-2hm load for the ¿nal ampli¿er stage of the transmitter. We recommend that the $TU be used whenever you operate
on the
FT
DX
1200
.
A
DVICE:
Because the $TU of the
FT
DX
1200
is located inside the station, it only adjusts the impedance presented to the trans-
ceiver at the station end of your coaxial cable feedline. It does not “tune” the SW5 at the antenna feed point itself.
When designing and building your antenna system, we recommend that every effort be made to ensure a low SW5
at the antenna feed point.
The $TU of the
FT
DX
1200
includes 100 memories for tuning data. (leven of these memories are allocated, one per
$mateur band, so that each band has at least one setting preset for use on that band. The remaining 8 memories are
reserved for the 8 most-recent tuning points, for Tuick freTuency change without the need to retune the $TU.
The $TU in the
FT
DX
1200
is designed to match impedances within the range of 16. 2hms to 10 2hms, cor-
responding to an SW5 of 31 or less on the 160 through 6 meter amateur bands. $ccordingly, simple non-resonant
whip antennas, along with random-length wires and the “G5V” antenna on most bands) may not be within the im-
pedance matching range of the $TU.
ATU OPERATION
USING THE AUTOMATIC ANTENNA TUNER
1. Use the 0ain Tuning 'ial knob to set the radio to
the desired operating freTuency within the $mateur
band.
. 3ress the
[
TUNE
]
button momentarily to place the
$TU in the transmit line no adjustmenttuning will
occur yet). The
TUNER
” icon will appear in the
display.
Q
UICK POINT:
The momentary press of the
[
TUNE
]
button will turn
the tuner on, and the microprocessor will automati-
cally select the tuning point closest to the current
operating freTuency.
3. 3ress and hold in the
[
TUNE
]
button for one second
to begin automatic tuning. The transmitter will be en-
gaged, and the “
TUNER
” icon will blink while tun-
ing is in progress. When the optimum tuning point
has been reached, the radio will return to receive,
and the “
TUNER
” icon will again glow steadily in-
stead of blinking).
4. To disconnect the $TU from the transmit line, press
the
[
TUNE
]
button momentarily. The “
TUNER
icon will turn off, con¿rming that the $TU has been
turned off. In the “2ff” mode, the transceiver will be
directly connected to the coaxial cable connected to
your antenna, and will respond to whatever imped-
ance is present at the station end of the coax.
A
DVICE:
The $TU circuit is located between the ¿nal ampli¿er
and the rear-panel antenna jack reception is not affected
by the $TU.
QUICK POINTS:
$s shipped from the factory, only one $TU alignment
point is saved on each $mateur band. This was memo-
ri]ed during the ¿nal alignment and performance veri¿-
cation stages on the production line.
N
OTE:
3lease check the operating freTuency before beginning
the tuning process, to be sure you are not interfering
with others who may already be using the freTuency.
T
ERMINOLOGY:
$ntenna Tuner 0emories The microprocessor of the
$TU makes a note of the selected tuning capacitors and
inductors, and stores the data for each 10 kH] window
in which tuning has occurred. This eliminates the need
to re-tune every time you return to a freTuency on which
you have already completed the tuning process.
[
TUNE
]
Button
67

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FTDX1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FTDX1200 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info