674747
60
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Page 58 FT
DX
1200 OPERATING MANUAL
T
OOLS
FOR
C
OMFORTABLE
AND
E
FFECTIVE
R
ECEPTION
RF GAIN
The 5F Gain control provides manual adjustment of the gain levels for the receiver 5F and IF stages, to account for
noise and signal strength conditions at the moment.
1. The
[
RF/SQL
]
knob should, initially, be rotated
to the fully clockwise position. This is the point of
maximum sensitivity.
. Counter-clockwise rotation of the
[
RF/SQL
]
knob
will gradually reduce the system gain.
A
DVICE:
$s the
[
RF/SQL
]
knob is rotated counterclockwise
to reduce the gain, the S-meter reading will rise. This
indicates that the $GC voltage being applied to the
receiver is increasing this causes a reduction in re-
ceiver gain).
5otating the
[
RF/SQL
]
knob control to the fully
counter-clockwise position will essentially disable
the receiver, as the gain will be greatly reduced. In
this case, the S-meter will appear to be “pegged”
against the right edge of the analog S-meter scale.
Q
UICK POINT:
5eception freTuently can be optimi]ed by rotating
the
[
RF/SQL
]
knob slightly counter-clockwise to the
point where the “stationary” meter indication is set
just about the same as the incoming noise level. This
will reduce the 5F gain to ¿nd a level of improved
signal to noise ratio.
The 5F Gain control, along with the I32 and the $t-
tenuator features, all affect the system receiver gain
in different ways. The I32 generally should be the
¿rst feature engaged when dealing with a high noise
level, or a crowded, high-level signal environment.
$lso, the I32 generally should be the first feature
engaged, if the freTuency is low enough to allow the
preampli¿er to be bypassed. Thereafter, the 5F Gain
and $ttenuator features may be employed to provide
precise, delicate adjustment of the receiver gain to
fully optimi]e performance.
[
RF/SQL
]
Knob
Switching the Knob Functions
You may switch the
[
RF/SQL
]
knob from the 5F Gain Function to the STuelch Function via 0enu item 038.
1. 3ress the
[
MENU
]
button to engage the 0enu
mode.
. 5otate the
[
VFO-B/CLAR
]
knob or press the
S
T
button) to select 0enu item “
038 RF
/
SQL
VR
”, then press the
[
SELECT
]
button.
3. 5otate the
[
VFO-B/CLAR
]
knob or press the
S
T
button) to select “
SQL
replacing the de-
fault “
RF
” selection).
4. 3ress the
[
SELECT
]
button, then press the
[
MENU
]
button to lock in the new setting and
exit to normal operation.
[
VFO-B/CLAR
]
Knob
[
S
/
T
]
Button
[
SELECT
]
Button
[
MENU
]
Button
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FTDX1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FTDX1200 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info