674747
41
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Page 39FT
DX
1200 OPERATING MANUAL
CONVENIENCE FEATURES
SCOPE
This function displays a convenient spectrum scope for monitoring the band conditions. Both strong and weak signals
can be displayed in an easy-to-understand manner on the TFT screen. This multifunctional scope takes into consid-
eration the operators preference, by switching between the convenient C(1T(5 mode where the VF2 freTuency is
constantly in the center of the screen for monitoring conditions on both sides of your operating freTuency), and the FI;
mode, where the freTuency is ¿xed to the left side of the screen for convenience in monitoring in the band).
Note: Since the
FT
DX
1200
has only one receiver the audio will be muted while the spectrum scope is scanning.
1. Select an operating mode for the scope function,
either C(1T(5 or FI; mode.
ADVICE:
See the instructions on the next page for details on
individual operating modes.
. 3ress the
[
SCOPE
]
button momentarily to display
the scope screen.
Five different screens are shown on the TFT display
by pressing the
[
SCOPE
]
button.
A
DVICE:
'uring continuous sweeping, no audio will be heard.
Sweep speed can be changed in the 0enu item
125 SCOPE SPEED
”.
The received sound spectrum is displayed on
the $F-FFT screen. 3ress the
[
MONI
]
button to
display the received station’s transmission signal
spectrum.
2n the $F-FFT screen, either the “Spectrum 'is-
play” or the “Waterfall 'isplay” can be selected
in the 0enu item “
185 FFT DISPLAY MODE
”.
Sweep Mode
MANUAL mode
(ach time the
[
SELECT
]
button is pressed, a new
scan of the spectrum scope is shown on the TFT
display.
ASC (Automatic Spectrum-Scope Control) mode
3ress the
[
AUTO
]
button to access the $SC mode.
AUTO
” icon is indicated in red on the spectrum
scope display. While the 0$I1 'I$L is turned
slowly, the spectrum scope does not change. When
the 0$I1 'I$L is turned Tuickly the audio is
muted and the spectrum scope is scanned continu-
ally and displayed on the spectrum scope screen
until the 0$I1 'I$L is completely stopped. When
the spectrum scope scanning is stopped, the audio is
restored. The last scan is shown on the TFT display.
Listen to the station and slowly ¿ne tune the station.
A
DVICE:
By setting the “
126 SCOPE AUTO TIME
” menu mode,
sweeping can be carried out automatically at the pre-
set interval.
Continuous mode
3ress the
[
AUTO
]
button and hold for 1 second.
The audio is muted and the spectrum scope is
scanned continuously until the
[
AUTO
]
button is
pressed again.
Full screen spectrum scope display
Spectrum scope plus the AF-FFT display
(When the optional FFT unit is installed)
Spectrum scope Memory display
(When the Scope Memory stored)
5%12'
5%12'
#(((6
ÆÆÆÆ
5%12'
Spectrum scope display
#(((6
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FTDX1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FTDX1200 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info