674747
12
Verklein
Vergroot
Pagina terug
1/140
Pagina verder
Page 10 FT
DX
1200 OPERATING MANUAL
CONNECTION OF ANTENNA AND POWER CABLES
3lease follow the outline in the illustration regarding the proper connection of antenna coaxial cables, as well as the 'C
power cable. The 'C power connector for the
FT
DX
1200
must only be connected to a 'C source providing 13.8 Volts 'C
10 ), and capable of at least 3 $mperes of current. $lways observe proper polarity when making 'C connection
The RED DC power lead connects to the Positive (+) DC terminal.
The BLACK DC power lead connects to the Negative (–) DC terminal.
We recommend the use of the
FP-1030A
US$ market only) $C 3ower Supply. 2ther models of power supplies may
be used with the
FT
DX
1200
, but the 13.8 V'C input voltage, 3 $mpere current capability, and 'C cable polarity
guidelines described above must be strictly followed.
1ote that other manufacturers may use the same type of 'C power connections as does your
FT
DX
1200
transceiver,
however, the wiring con¿guration may be different from that speci¿ed for your transceiver. Serious damage can be
caused if improper 'C connections are made consult with a Tuali¿ed service technician when in doubt.
The 100 V 5F voltage #100 W0-ohm) is applied to the T; 5F section of the transceiver while transmitting.
'o not touch the T; 5F section absolutely while transmitting.
3ermanent damage can result when improper supply voltage, or reverse-polarity voltage, is applied to the
FT
DX
1200
. The Limited Warranty on this transceiver does not cover damage caused by application of $C volt-
age, reverse polarity 'C, or 'C voltage outside the speci¿ed range of 13.8 V 10 . When replacing fuses, be certain
to use a fuse of the proper rating. The
FT
DX
1200
reTuires a  $ blade fuse.
ADVICE:
'o not position the
FT
DX
1200
in a location with direct exposure to sunshine.
'o not position the
FT
DX
1200
in a location exposed to dust andor high humidity.
(nsure adeTuate ventilation around the
FT
DX
1200
, to prevent heat build-up and possible reduction of performance
due to high heat.
'o not install the
FT
DX
1200
on an unstable desk or table. 'o not place in a location where objects may fall onto it from above.
To minimi]e the possibility of interference to home entertainment devices, take all precautionary steps including
separation of TVF0 antennas from $mateur transmitting antennas to the greatest extent possible, and keep trans-
mitting coaxial cables separated from cables connected to home entertainment devices.
(nsure that the 'C power cord is not subject to undue stress or bending, which could damage the cable or cause it to
be accidentally unplugged from the rear panel
DC IN
jack.
Be certain to install your transmitting antennas) so they cannot possibly come in contact with TVF0 radio or other
antennas, or with power or telephone lines.
INSTALLATION AND INTERCONNECTIONS
To prevent damage from
lightning, atmospheric elec-
tricity, electrical shock etc., please
provide a good earth ground.
Use a short,
thick, braided
cable to con-
nect your station
eTuipment to the
buried ground rod or alternative earth
ground system).
Check the DC volt-
age and current rating
(+13.8 V, 23 A) of the power
supply before connecting to the
transceiver.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FTDX1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FTDX1200 in de taal/talen: Engels als bijlage per email.

De handleiding is 14,65 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info