674740
130
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 128 FT-991 OperaTing Manual
039 REF FREQ ADJ
Function: Adjusts the reference oscillator.
Available Values: −25 - 0 - 25
Default Setting: 0
Description: The frequency may be calibrated when
connecting a frequency counter to the transceiver, or
when receiving a standard frequency such as WWV
or WWVH.
040 CLAR MODE SELECT
Function: Selects the clarier operation.
Available Values: RX/TX/TRX
Default Setting: RX
Description: Selects the clarifier operation when the
CLAR
button is pressed.
RX:
Functions as the RX clarier which changes only
the receiver frequency without changing transmit
frequency.
TX:
Functions as the TX clarier which changes only
the transmit frequency without changing the re-
ceiver frequency.
TRX:
Functions as the TRX clarier which changes the
transmit frequency and the receiver frequency
simultaneously.
041 AM LCUT FREQ
Function: Sets the low-frequency cutoff audio filter in
AM mode.
Available Values: OFF/100Hz - 1000Hz (50Hz/step)
Default Setting: OFF
Description: This is the low-frequency cutoff audio lter
in AM mode.
The cutoff frequency can be set at 50 Hz increments
between 100 Hz and 1000 Hz.
042 AM LCUT SLOPE
Function: Sets the slope of the low-frequency cutoff au-
dio lter in AM mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope of the low-frequency cut-
off audio lter in AM mode.
043 AM HCUT FREQ
Function: Sets the high-frequency cutoff audio lter in
AM mode.
Available Values: OFF/700Hz - 4000Hz (50Hz/step)
Default Setting: OFF
Description: This is the high-frequency cutoff audio l-
ter in AM mode.
The cutoff frequency can be set at 50 Hz increments
between 700 Hz and 4000 Hz.
044 AM HCUT SLOPE
Function: Sets the slope of the high-frequency cutoff au-
dio lter in AM mode.
Available Values: 6dB/oct / 18dB/oct
Default Setting: 6dB/oct
Description: Selects the slope of the high-frequency cut-
off audio lter in AM mode.
045 AM MIC SELECT
Function: Selects the microphone input jack for AM
mode.
Available Values: MIC/REAR
Default Setting: MIC
Description: Selects the microphone input jack to be
used in AM mode.
FRONT:
Audio is input from the
MIC
jack on the front
panel.
DATA:
Disables the microphone circuit on the front
panel and inputs audio/data from the
USB
jack
or
RTTY/DATA
jack on the rear panel.
046 AM OUT LEVEL
Function: Sets the level of the receive AM signal output
from the
RTTY/DATA
jack.
Available Values: 0 - 100
Default Setting: 50
047 AM PTT SELECT
Function: Sets the PTT control for the AM transmit sig-
nal.
Available Values: DAKY/RTS/DTR
Default Setting: DAKY
Description: Selects the PTT control method for the AM
transmit.
DAKY:
Controls the AM transmit signal from the
RTTY/
DATA
jack (pin 3) on the rear panel.
DTR:
Controls the AM transmit signal from the USB
virtual COM/DTR ports.
RTS:
Controls the AM transmit signal from the USB
virtual COM/RTS ports.
048 AM PORT SELECT
Function: Selects the input jack of the AM signal.
Available Values: DATA/USB
Default Setting: DATA
Description: Selects the input jack of the AM signal
when “
045 AM MIC SELECT
” is set to “
DATA
”.
DATA:
Inputs from the
RTTY/DATA
jack on the rear
panel.
USB:
Inputs from the
USB
jack on the rear panel.
Menu MoDe
130

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info