674740
94
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 92
FT-991 OperaTing Manual
repeAter operAtion
The
FT-991
may be utilized on 29 MHz, 50 MHz, 144 MHz and 430 MHz repeaters.
1. Rotate the Main Tuning Dial knob to set the
FT-991
to the desired repeaters output frequency (downlink
from the repeater).
2. If CTCSS Tone operation is desired/needed, press
the
F(M-LIST)
button, then touch
[
TONE/DCS
]
on
the LCD to engage the CTCSS mode.
MULTI Knob
F(M-LIST) Button
3. Touch
[
TONE/DCS
]
on the LCD repeatedly to
select the desired CTCSS mode. If the repeater re-
quires an uplink encoding tone, select “
ENC
.” For
both uplink and downlink encode/decode operation,
choose “
CTCSS
”. The available choices are:
OFF
ENC
(Tone Encoder)”

CTCSS
(Tone Squelch)”
DCS
(Digital Code Squelch)”
OFF
4. Touch
[
RPT
]
repeatedly on the LCD to select the
desired repeater shift direction. The selections are:
SIMP
+
SIMP
where “
SIMP
” represents “Simplex” operation (not
used on a repeater).
5. Touch
[
FWD
]
to switch the display screen, and then
touch
[
TONE
]
. Rotate the
MULTI
knob to select
the desired CTCSS Tone to be used. A total of 50
standard CTCSS tones are provided (see the CTCSS
Tone Chart).
6. Press and hold the microphone
PTT
switch to begin
transmission. You will observe that the frequency
has shifted to correspond to the programming set up
in the previous steps. Speak into the microphone in a
normal voice level. Release the
PTT
switch to return
to the receive mode.
Advice:
The conventional repeater shift used on 29 MHz is
100 kHz, while on the 50 MHz band the shift may
vary between 500 kHz and 1.7 MHz (or more). On
the 144 MHz band, the shift will be 600 kHz; on
the 430 MHz band, the shift will be 1.6 MHz or 7.6
MHz (5 MHz for the U.S.A. version). To program
the proper repeater shift, use Menu items
080
RPT SHIFT 28MHz
” (28 MHz), “
081 RPT SHIFT
50MHz
(50 MHz),
082 RPT SHIFT 144MHz
(144 MHz), and
083 RPT SHIFT 430MHz
” (430
MHz) as appropriate.
Press the
F(M-LIST)
button, then touch
[
REV
]
on
the LCD to reverse the transmission and reception
frequencies temporarily to check whether direct
communication with the partner station is possible.
When reversing the frequencies, + or will flash.
When
[
REV
]
is touched one more time, the reverse
is cancelled.
ctcSS tone Frequency
(
Hz
)
67.0 69.3 71.9 74.4 77.0 79.7 82.5 85.4
88.5 91.5 94.8 97.4 100.0 103.5 107.2 110.9
114.8 118.8 123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9 171.3 173.8
177.3 179.9 183.5 186.2 189.9 192.8 196.6 199.5
203.5 206.5 210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1
- - - - - -
fM MoDe operation
94

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info