674740
15
Verklein
Vergroot
Pagina terug
1/154
Pagina verder
Page 13
F
T-991
OperaTing Manual
before You beGin
connection oF AntennA And poWer cAbleS
Please follow the outline in the illustration regarding the proper connection of antenna coaxial cables, as well as the DC
power cable. The DC power connector for the
FT-991
must only be connected to a DC source providing 13.8 Volts DC (±15
%), and capable of at least 23 Amperes of current. Always observe proper polarity when making DC connection:
The RED DC power lead connects to the Positive (+) DC terminal.
The BLACK DC power lead connects to the Negative (–) DC terminal.
We recommend the use of the
FP-1030A
(USA market only) AC Power Supply. Other models of power supplies may
be used with the
FT-991
, but the 13.8 VDC input voltage, 23 Ampere current capability, and DC cable polarity guide-
lines described above must be strictly followed.
Note that other manufacturers may use the same type of DC power connections as the
FT-991
transceiver; however, the
wiring conguration may be different from that specied for the
FT-991
transceiver. Serious damage can be caused if
improper DC connections are made; consult with a qualied service technician when in doubt.
High RF voltage is present in the TX RF section of the transceiver while transmitting.
Absolutely! Do not touch the TX RF section while transmitting.
Permanent damage can result when improper supply voltage, or reverse-polarity voltage, is applied to the
FT-
991
. The Limited Warranty on this transceiver does not cover damage caused by application of AC voltage, re-
verse polarity DC, or DC voltage outside the specied range of 13.8 V ±15 %. When replacing fuses, be certain
to use a fuse of the proper rating. The
FT-991
requires a 25 Amp blade fuse.
note:
Do not place the
FT-991
in a location with direct exposure to sunshine.
Do not place the
FT-991
in a location exposed to dust and/or high humidity.
Ensure adequate ventilation around the
FT-991
, to prevent heat build-up and possible reduction of performance due
to high heat.
Do not install the
FT-991
on an unstable desk or table. Do not place it in a location where objects may fall onto it
from above.
To minimize the possibility of interference to home entertainment devices, take all precautionary steps including
separation of TV/FM antennas from Amateur transmitting antennas to the greatest extent possible, and keep trans-
mitting coaxial cables separated from cables connected to home entertainment devices.
Ensure that the DC power cord is not subject to undue stress or bending, which could damage the cable or cause it to
be accidentally unplugged from the rear panel
DC IN
jack.
Be certain to install your transmitting antenna(s) so they cannot possibly come in contact with TV/FM radio or other
antennas, or with power or telephone lines.
Check the DC volt-
age and current
rating (+13.8 V, 23 A) of the
power supply before con-
necting to the transceiver.
To prevent damage from
lightning, atmospheric elec-
tricity, electrical shock etc., please
provide a good earth ground.
Use a short,
thick, braided
cable to con-
nect your station
equipment to the
buried ground rod (or alternative earth
ground system).
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-991 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-991 in de taal/talen: Engels als bijlage per email.

De handleiding is 30,58 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info