478500
64
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 62 FT-897D OPERATING MANUAL
MENU MODE No077
[
SCAN MODE
]
Function: Selects the desired Scan-Resume mode.
Available Values: TIME/BUSY/STOP
Default: TIME
This Menu Item allows you to select your favorite method
of scan-restart after the scanner has stopped on an incoming
signal (when the squelch opens).
TIME: The scanner will hold for a fixed length of time, set
via MENU MODE No-078
[
SCAN RESUME
]
, then
resume whether or not the other station is still trans-
mitting.
BUSY: The scanner will hold until the signal disappears, then
will resume after one second.
STOP:The scanner will stop when a signal is received, and
will not restart.
MENU MODE No078
[
SCAN RESUME
]
Function: Sets the delay time for scanning resumption.
Available Values: 1 ~ 10 (sec)
Default: 5
MENU MODE No079
[
SPLIT TONE
]
Function: Enables/disables split CTCSS/DCS cording.
Available Values: OFF/ON
Default: OFF
MENU MODE No-080
[
SQL/RF GAIN
]
Function: Selects the configuration of the front panel’s SQL/
RF knob.
Available Values: RF-GAIN/SQL
Default: Depends on transceiver version.
MENU MODE No-081
[
SSB MIC GAIN
]
Function: Adjusts the microphone gain level for the SSB
mode.
Available Values: 0 ~ 100
Default: 50
MENU MODE No-082
[
SSB STEP
]
Function: Selects the tuning steps for the MEM/VFO CH
knob on the SSB mode.
Available Values: 1kHz/2.5kHz/5kHz
Default: 2.5kHz
MENU MODE No-083
[
TONE FREQ
]
Function: Setting of the CTCSS Tone Frequency.
Available Values: 50 Standard CTCSS tones
Default: 88.5 Hz
MENU MODE No-084
[
TOT TIME
]
Function: Select the Automatic Power Off time.
Available Values: OFF/1 ~ 20 (min)
Default: OFF
MENU OPERATION
MENU MODE No085
[
TUNER/ATAS
]
Function: Selects the device (FC-30 or ATAS-100/-120)
to be controlled via the front panel’s
[
A
](
TUNE
)
key.
Available Values: OFF/ATAS(HF)/ATAS(HF&50)/
ATAS(ALL)/TUNER
Default: OFF
OFF: The
[
A
](
TUNE
)
key is disabled.
ATAS
(
HF
)
: The
[
A
](
TUNE
)
key will activate the optional
ATAS-100/-120 on the HF amateur bands.
ATAS
(
HF&50
)
: The
[
A
](
TUNE
)
key will activate the optional
ATAS-100/-120 on the HF amateur bands
and 50 MHz amateur band.
ATAS
(
ALL
)
: The
[
A
](
TUNE
)
key will activate the optional
ATAS-100/-120 on the all amateur bands
which enable to the FT-897D transceiver.
TUNER: The
[
A
](
TUNE
)
key will activate the optional
FC-30.
MENU MODE No086
[
TX IF FILTER
]
Function: Selects the Transmit IF filter.
Available Values: CFIL/FIL1/FIL2
Default: CFIL
MENU MODE No087
[
VOX DELAY
]
Function: Sets the “hang time” for the VOX circuitry.
Available Values: 100 ~ 3000 (ms)
Default: 500 (ms)
MENU MODE No-088
[
VOX GAIN
]
Function: Sets the gain of the VOX circuitry’s input audio
detector.
Available Values: 1 ~ 100
Default: 50
MENU MODE No089
[
XVTR A FREQ
]
Function: Allows an arbitrary frequency to be set on the dis-
play, to allow direct frequency readout during transverter op-
eration; can also be used to account for frequency conversion
inaccuracies when a known reference frequency is known.
Available Values: 00,000,00 ~ 99,999,99 (kHz)
Default: Current VFO frequency.
MENU MODE No090
[
XVTR B FREQ
]
Function: Allows an arbitrary frequency to be set on the dis-
play, to allow direct frequency readout during transverter op-
eration; can also be used to account for frequency conversion
inaccuracies when a known reference frequency is known.
Available Values: 00,000,00 ~ 99,999,99 (kHz)
Default: Current VFO frequency.
MENU MODE No091
[
XVTR SEL
]
Function: Enable/disable the Transverter function.
Available Values: OFF/XVTR A/XVTR B
Default: OFF
OFF: Disables the Transverter operation feature.
X VTR A: Activates the transverter operation feature.
The display frequency may be set via MENU No-
089
[
XVTR A FREQ
]
.
X VTR B: Activates the second transverter operation display.
The display frequency may be set via MENU No-
090
[
XVTR B FREQ
]
.
64

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info