478500
14
Verklein
Vergroot
Pagina terug
1/76
Pagina verder
Page 12 FT-897D OPERATING MANUAL
Liquid Crystal Display
The Liquid Crystal Display (LCD) provides indication
of the operating frequency and other aspects of trans-
ceiver status.
FUNC Keys
These three keys select many of the most important op-
erating features of the transceiver. When you press the
[
F
]
key, then rotate the MEM/VFO CH knob, the cur-
rent function of that key will appear above each of the
[
A
]
,
[
B
]
, and
[
C
]
keys (along the bottom of the LCD).
You may scroll the display through 17 rows of functions
available for use via the
[
A
]
,
[
B
]
, and
[
C
]
keys.
The available features are shown in page 14.
MIC Jack
Connect the supplied MH-31A8J Hand Microphone to
this jack.
[
F
]
Key
Press this key momentarily to enable the changing of the
function of the Multi Function keys (
[
A
]
,
[
B
]
, and
[
C
]
)
by the MEM/VFO CH knob.
Press and hold this key for one second to activate the
“Menu” mode.
LOCK Key
Pressing this key locks the front panel keys so as to pre-
vent accidental frequency change. The LOCK key it-
self, though, will never be disabled.
MAIN DIAL
This is the main tuning dial for the transceiver. It is used
both for frequency tuning as well as “Menu” setting in
the transceiver.
AF Knob
The (inner) VOL knob adjusts the receiver audio vol-
ume level presented to the internal or external speaker.
Clockwise rotation increases the volume level.
SQL/RF Knob
In the USA version, this (outer) SQL/RF knob adjusts
the gain of the receivers RF and IF stages. Using Menu
Mode No-080
[
SQL/RF GAIN
]
, this control may be
changed to function as a Squelch control, which may be
used to silence background noise when no signal is
present. In the other versions, its default setting is set to
“Squelch.”
CLAR/IF SHIFT Key
Pressing this key activates the Receiver Clarifier fea-
ture. When this feature is activated, the CLAR knob is
used to set a tuning offset of up to ±9.99 kHz. The
transmitters frequency is not affected by the setting of
the Clarifier.
Press and hold this key for one second to activate the IF
Shift feature, which allows you to use the MEM/VFO
CH knob to adjust the center frequency of the IF filters
passband response.
FRONT PANEL CONTROL & SWITCHES
BATT-B
BATT-A
FAST
GND
PTT
MICMIC GN
D
+5 V
UP
DOWN
PHONES Jack
This 1/4-inch, 3-contact jack accepts either monaural or
stereo headphones with 2- or 3-contact plugs. When a
plug is inserted, the loudspeaker is disabled. The audio
level varies according to the setting of the front panel’s
AF knob.
POWER Switch
Press and hold in the POWER switch for one second to
turn to the transceiver on or off.
While the transceiver is turned on, pressing this switch
momentarily will engage the “Fast Tuning” mode, to al-
low more rapid frequency navigation (a small “running
man” icon will be observed in the bottom right-hand
corner of the LCD).
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-897D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-897D in de taal/talen: Engels als bijlage per email.

De handleiding is 3,3 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info