478498
34
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
32 FT-817ND Operating Manual
Operation using Built-in Electronic Keyer
The built-in Electronic Keyer provides a convenient method of generating CW. The Elec-
tronic Keyer includes weight and speed adjustments.
1. Connect your keyer paddle’s cable to the KEY jack on the rear panel of the transceiver.
2. Press the / key, as needed, to select the CW (CW/CWR) mode.
3. Press the key momentarily, then rotate the knob, as needed, until Operating
Function Row 10
[
VOX, BK, KYR
]
appears on the display.
4. Press the
(
KYR
)
key to activate the Electronic Keyer. The “” icon will appear at
the right of the “KYR” indication.
5. The Keyer speed may be adjusted using Menu #21 (CW SPEED). To adjust the Keyer
speed:
Press and hold in the key for one second to enter the Menu mode.
Rotate the knob to select Menu #21 (CW SPEED).
Press the knob if you wish to select display of “cpm” (characters per minute)
instead of “wpm” (words per minute). The “cpm” selection is based on the interna-
tional “PARIS” standard, which stipulates five characters per word.
Rotate the knob, while sending, to set the desired sending speed.
When done, press and hold in the key for one second to save the new setting and
exit to normal operation.
If you are already using Operating Function Row 10
[
VOX, BK, KYR
]
, press
and hold in the [C](KYR) key to switch instantly to Menu #21 (CW SPEED).
6. The Dot:Dash weighting ratio may be adjusted via Menu #22 (CW WEIGHT). To adjust
the Dot:Dash weighting ratio:
Press and hold in the key for one second to enter
the Menu mode.
Rotate the knob to select Menu #22 (CW
WEIGHT).
Rotate the knob to set the desired weight.
When done, press and hold in the key for one second
to save the new setting and exit to normal operation.
7. You may select “normal” or “reverse” paddle polarity via Menu #19 (CW PADDLE).
The default setting for this feature is “normal,” whereby the “Tip” connection on the
Key Plug is “Dot” and the “Ring” connection is “Dash.” To change the paddle polarity:
Press and hold in the key for one second to enter the Menu mode.
Rotate the knob to select Menu #19 (CW PADDLE).
Rotate the knob to select the new setting.
When done, press and hold in the key for one second to save the new setting and
exit to normal operation.
CW TRANSMISSION
TRANSMITTER OPERATION
34

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-817ND bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-817ND in de taal/talen: Engels als bijlage per email.

De handleiding is 3,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info