478498
30
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
28 FT-817ND Operating Manual
SSB TRANSMISSION
Basic Setup/Operation
1. Press the / key so as to select either SSB (LSB/USB) mode. If you
are operating on the 7 MHz or lower bands, select the LSB mode. If you are operating
on the 14 MHz or higher bands, select the USB mode.
2. Press the key momentarily, then rotate the knob, as needed, until Operating
Function Row 9
[
PWR, MTR
]
appears on the display, then press the
(
MTR
)
key to
select the “ALC” meter function (“alc” will appear at the right side of the “MTR” icon).
3. Press the microphone’s PTT switch, and speak into the microphone in a normal voice
while watching the meter. The ideal audio input level to the transmitter from the micro-
phone will cause a few “segments” of indication on the ALC meter. Release the PTT
switch to return to receive mode.
4. If the ALC meter is too high, or too low, you may need to reset the Microphone Gain:
Press and hold in the key for one second to enter the Menu mode.
Rotate the knob to recall Menu #46 (SSB MIC).
Close the PTT switch, and while speaking into the microphone rotate the
knob until the proper ALC indication is achieved on voice peaks.
When done, press and hold in the key to save the new setting for the Microphone Gain.
The
[
TONE
]
switch on the back of the MH-31A8J microphone provides adjust-
ment of the microphone’s frequency response. Setting this switch to the “2” posi-
tion will roll off some of the bass response, resulting in improved “talk power” in many
instances. The “1” position is primarily used in countries like Japan, where vowel sounds
are of critical importance in conveying information; in Western languages, consonant
sounds (which are rich in high-frequency components) are frequently more important.
Adjusting the Transmitter Power Output
Four power levels are available on the FT-817ND: 5 Watts, 2.5 Watts, 1 Watt, and
0.5 Watt. When using Alkaline batteries or the supplied FNB-85 Ni-MH Battery
Pack, the microprocessor, detecting internal battery use, automatically sets the power
level to 2.5 Watts, which appears on the display as “ ”. If you set the power to five
watts, the power level icon is the same as for 2.5 Watt operation, but at 5 Watts the
icon is blinking. For 0.5 Watt, there is one “bar” to the right of the “L” in the power
icon, and for 1 Watt there are two “bars” displayed.
The power level is easy to change:
1. Press the key momentarily, then rotate the knob to select Operating
Function Row 9
[
PWR, MTR
]
.
2. Press the
(
PWR
)
key, as needed, to set the desired power level. The icon
will change, based on the power level you have set.
TRANSMITTER OPERATION
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-817ND bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-817ND in de taal/talen: Engels als bijlage per email.

De handleiding is 3,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info