478498
22
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
20 FT-817ND Operating Manual
OPERATION
MENU QUICK START
Many aspects of this transceivers configuration may be customized using the convenient
“Menu” system, which allow you to configure many “set and forget” settings just the way
you want to. A full discussion of the Menu system beings on page 58; for now, here is a
brief discussion on how to change Menu settings:
1. Press and hold in the key for one second to enter the Menu mode.
2. Rotate the knob to recall the Menu item to be changed (for example, Menu #01,
which Enables or Disables the Automatic Repeater Shift on the 144 MHz band).
3. Rotate the knob to set this feature (in this example, the default setting is “EN-
ABLE,” so rotate the knob to set this feature to “DISABLE.”
4. Press and hold in the key for one second to save the new setting and exit to normal
operation.
If you have momentarily pressed the key to change an operating function,
press the key momentarily again (to clear the function indications for the
, , keys) before engaging the Menu.
ADJUSTING THE RF GAIN AND SQUELCH
The control is configured differently,
depending on the country to which the FT-
817ND has been exported. In the U.S. version,
the default function of this control is “RF Gain.”
The configuration of the control is set
via Menu #45; see page 67 for details.
If your transceiver is configured for “RF Gain” use, rotating this control fully clockwise in
the SSB/CW/Digital modes will provide best sensitivity. To reduce the receivers RF Gain
somewhat, rotate this control counter-clockwise slightly. You will observe an increasing
number of bars on the S-meter as you rotate the control counter-clockwise; this
indicates increasing AGC voltage, which is causing the front-end gain to be reduced. In the
FM and Packet modes, this control will automatically be set to an “Auto-Squelch” mode,
wherein the FM/Packet squelch threshold is pre-set at the factory; the control still
acts as an “RF Gain” control, however, and it normally should be set fully clockwise.
If this control is configured for “SQL” operation, the FT-817NDs RF Gain will be set for
maximum sensitivity in all modes, and the control will function solely as a Squelch
control. In this case, rotate the control to the point where the background noise is
just silenced; this will provide the best sensitivity to weak signals, while keeping the re-
ceiver quiet when no signal is received. The LED just above the Main Dial will glow Green
when the squelch is opened by an incoming signal or noise.
Battery consumption is significantly reduced if the receiver is squelched, as the
audio amplifier stage is shut off when the receiver is muted.
22

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-817ND bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-817ND in de taal/talen: Engels als bijlage per email.

De handleiding is 3,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info