478498
16
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
14 FT-817ND Operating Manual
SPL
Press the key to activate
Split frequency operation be-
tween VFO-A and VFO-B.
TAG
Press the key to select
the display type (Frequency or
Alpha-numeric Tag) during
Memory operation.
PMS
Press the key to activate
the Programmable Memory
Scan feature.
TON
Press the key to activate
CTCSS or DCS operation.
Press and hold in the key
for 1/2 second to recall Menu
#48 (for selecting the CTCSS
tone frequency).
DW
Press the key to activate
the Dual Watch system.
ART
Press the key to initiate
the Auto-Range Transponder
mode.
Press and hold in the key
for 1/2 second to recall Menu
#09 (for selecting the ARTS
“Beep” option).
NAR
Press the key to activate
the “Narrow” filter mode in the
CW (optional YF-122C or YF-
122CN required) mode. On
the FM mode, it also selects
the low-deviation mode re-
quired for HF FM operation on
29 MHz.
Press and hold in the key
for 1/2 second to recall Menu
#38 (to Enable/Disable the
optional filter during installa-
tion).
A/B
Press the key to switch
between VFO-A and VFO-B
on the display.
MW
Press and hold in the key
for 1/2 second to transfer the
contents of the VFO into a
Memory register.
STO
Press the key to store the
contents of the VFO into the
QMB (Quick Memory Bank)
register.
RPT
Press the key to select
the direction of the uplink fre-
quency shift (“–,” “+,” or Sim-
plex) during FM repeater op-
eration.
Press and hold in the key
for 1/2 second to recall Menu
#42 (for setting the shift fre-
quency offset).
SCN
Press the key to initiate
scanning (in the direction of
higher frequencies).
SSM
Press the key to activate
the Spectrum Scope Monitor
feature.
Press and hold in the key
for 1/2 second to recall Menu
#43 (for selecting the SSM
sweep mode).
IPO
Press the key to bypass
the receiver preamplifier,
thereby activating Intercept
Point Optimization for im-
proved overload characteris-
tics.
The IPO feature does not
function on 144/430 MHz.
A=B
Press and hold in the key
for ½ second to copy the con-
tents of VFO-A into the VFO-
B register, so that the two
VFOs’ contents will be identi-
cal.
MC
Press the key to desig-
nate the current Memory
channel to be “skipped” dur-
ing scanning.
RCL
Press the key to recall
the QMB Memory.
REV
Press the key to reverse
the transmit and receive fre-
quencies while working
through a repeater.
PRI
Press the key to activate
the Priority Scan feature.
SCH
Press the key to activate
Smart Search
TM
operation.
ATT
Press the key to engage
the receiver front-end attenu-
ator, which will reduce all sig-
nals and noise by approxi-
mately 10 dB.
The ATT feature does not
function on 144/430 MHz.
Key Key
1
2
3
4
5
6
7
FRONT PANEL CONTROL & SWITCHES
16

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-817ND bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-817ND in de taal/talen: Engels als bijlage per email.

De handleiding is 3,25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info