478466
71
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
69FT-7900R OPERATING MANUAL
MENU
(
“SET
)
MODE
REPEATER SETTING
Activates/deactivates the Automatic Repeater Shift feature.
Sets the Repeater Shift Direction.
Sets the magnitude of the Repeater Shift.
CTCSS/DCS/DTMF SETTING
Setting the DCS code.
Selects “Normal” or “Inverted” DCS coding.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Loading of the DTMF Autodialer Memories.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Sets the Synthesizer steps.
Sets the CTCSS Tone Frequency.
ARTS SETTING
Selects the ARTS beep mode.
Selects the Polling Interval during ARTS operation
Enables/disables the CW identifier during ARTS operation.
Stores your callsign into the CW identifier.
MEMORY SETTING
Toggle the display indication of the Memory/Home channel between
“frequency” and the channel’s “Alpha-numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory/Home channels.
SCAN SETTING
Enables/Disables the Priority Revert feature.
Selects the Smart Search Sweep mode.
Selects the Scan-Resume mode.
Selects the Memory Scan channel-selection mode.
Selects what action will happen on a “flagged” Memory Channel.
Enables/disables the Weather Alert Scan.
POWER SAVE SETTING
Selects the Automatic Power Off time (time before power goes off).
Sets the Time-Out Timer.
DISPLAY SETTING
Setting of the Display brightness level.
SWITCH/KNOB SETTING
Enables/disables the beeper
Selects the alternate function (press and hold in) of the
[
TONE
(
HM/RV
)]
key and primary function (press momentarily) of the
[
V/M
(
MW
)]
key.
Selects the Control Locking lockout combination.
Programming the alternate (press and hold in) function of the front panel’s
[
LOW
(
ACC
)]
key.
Programming the microphone’s
[
P1
]
/
[
ACC
]
button assignment.
Programming the microphone’s
[
P2
]
/
[
P
]
button assignment.
Programming the microphone’s
[
P3
]
/
[
P1
]
button assignment.
Programming the microphone’s
[
P4
]
/
[
P2
]
button assignment.
WIRES SETTING
Selects the Internet Connection mode.
Selects the Access Number (DTMF digit) for WiRES
TM
operation.
Selects the Access Number (DTMF code) for non-WiRES
TM
Internet Link
System access.
MISCELLANEOUS SETTING
Shifting of CPU clock frequency.
Enables/Disables the Band-edge beeper while selecting the frequency
by the DIAL knob.
Enables/disables the Automatic Writing feature for the Hyper Memory.
Selects the microphone type to be used.
Enables/disables the microphone input during Packet operation.
Sets the transceiver’s circuitry for the Packet baud rate to be used.
Adjust the RF SQL threshold level.
Selects the Receiving mode.
Selects or disables the VFO band edge limiting for the current band.
Reducing the MIC Gain (and Deviation).
SET MODE ITEM
4 ARS
33 RPT.MOD
39 SHIFT
SET MODE ITEM
9 DCS.COD
10 DCS.N/R
12 DT DLY
13 DT SPD
14 DT WRT
41 SPLIT
42 SQL.TYP
43 STEP
44 TN FRQ
SET MODE ITEM
2 AR BEP
3 AR INT
7 CWID
8 CW WRT
SET MODE ITEM
23 NAME
24NM WRT
SET MODE ITEM
34 PRI.RVT
36 S SRCH
37 SCAN
38 SCN MD
40 SKIP
48 WX ALT
SET MODE ITEM
1 APO
45 TOT
SET MODE ITEM
11 DIMMER
SET MODE ITEM
5 BEEP
16 HM/REV
21 LOCK
27 PRG.PNL
28 PRG P1(ACC)
29 PRG P2(P)
30 PRG P3(P1)
31 PRG P4(P2)
SET MODE ITEM
18 I NET
19 INT CD
20 INT MR
SET MODE ITEM
6 CLK.SFT
15 EDG.BEP
17 HYPER
22 MIC
25 PKT.MIC
26 PKT.SPD
32 RF SQL
35 RX MOD
46 VFO.BND
47 WID.NAR
AVAILABLE VALUES
(
DEFAULT
)
ARS.ON/ARS.OFF
ÚÚ
ÚÚ
Ú
RPT.OFF/RPT. --/RPT.+
ÚÚ
ÚÚ
Ú
0.00 ~ 99.95 MHz
ÚÚ
ÚÚ
Ú
AVAILABLE VALUES
(
DEFAULT
)
104 Standard DCS codes
(
023
)
TRX N/RX R/TX R/TRX R
50MS/100MS/250MS/450MS/
750MS/1000MS
50MS/75MS/100MS
---
SPL.OFF/SPL.ON
OFF/ENC/ENCDEC/REV TN/DCS
AUTO/ 5.0 k/10.0 k/12.5 k/15.0 k/
20.0 k/25.0 k/50.0 k/100 k
50 Standard CTCSS Tones
(
100Hz
)
AVAILABLE VALUES
(
DEFAULT
)
INRANG/ALWAYS/OFF
25sec/15sec
TX ON/TX OFF
---
AVAILABLE VALUES
(
DEFAULT
)
FREQ/ALPHA
---
AVAILABLE VALUES
(
DEFAULT
)
RVT.ON/RVT.OFF
SINGLE/CONT
TIME/BUSY/HOLD
MEM/ONLY
OFF/SKIP/MEM
ALT.ON/ALT.OFF
AVAILABLE VALUES
(
DEFAULT
)
OFF/0.5 H ~ 12.0 H
1 ~ 30 minutes or OFF
(
6 minutes
)
AVAILABLE VALUES
(
DEFAULT
)
DIM 1/DIM 2/DIM 3/DIM.OFF
AVAILABLE VALUES
(
DEFAULT
)
KEY/KEY+SC/OFF
REV/HOME
LK KEY/LK DIAL/LK K+D/LK PTT/
LK P+K/LK P+D/LK ALL
WX/REV/RPTR/SQ.OF/LOCK/DIM
SQ.OF/TCAL/SSCH/ARTS/TN.FQ/
DCSC/WX/RPTR/PRI/LOW
(
#31
)
/
TONE
(
#30
)
/MHz/REV/HOME/
BAND
(
#28
)
/V/M
(
#29
)
/SCAN
AVAILABLE VALUES
(
DEFAULT
)
INT.COD/INT.MEM
CODE 0 ~ 9/A/B/C/D/E/F
(
CODE 1
)
d-1 ~ d-16
AVAILABLE VALUES
(
DEFAULT
)
SFT.ON/SFT.OFF
BEP.ON/BEP.OFF
MANUAL/1-AUTO/AUTO
MH-48/MH-42
MIC.ON/MIC.OFF
1200bps/9600bps
OFF/S-2/S-3/S-4/S-5/S-6/S-7/S-8/
S-9/S-FULL
AUTO/FM/AM
BND.ON/BND.OFF
WIDE/NARROW
ÚÚ
ÚÚ
Ú
:
Depends on the band of operation.
71

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-7900R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-7900R in de taal/talen: Engels als bijlage per email.

De handleiding is 2,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info