478466
60
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
58 FT-7900R OPERATING MANUAL
The FT-7900R can be used to access a repeater or base station which is configured to
provide access to the Vertex Standard WiRES
TM
(Wide-Coverage Internet Repeater Enhance-
ment System) operating in the “SRG” (“Sister Radio Group”) mode.
1. Press the
[ (
L
)]
key momentarily to activate the
WiRES
TM
access capability. The “ ” icon will appear
on the display.
2. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second
to enter the Set mode.
3. Rotate the DIAL knob to select Menu #19 (
INT CDINT CD
INT CDINT CD
INT CD).
4. Press the
[
BAND
(
SET
)]
key momentarily, then rotate the DIAL knob to select the ac-
cess number (
CODECODE
CODECODE
CODE
00
00
0” ~ “
99
99
9”, “
AA
AA
A”, “
BB
BB
B”, “
CC
CC
C”, “
DD
DD
D”, “
EE
EE
E (¼)”, or “
FF
FF
F (#)”) corresponding
to the WiRES
TM
repeater you wish to establish an Internet
link with (ask your repeater owner/operator if you don’t
know the access numbers of the network).
5. Press the
[
BAND
(
SET
)]
key momentarily to lock in the selected access number, then
press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
6. With the WiRES
TM
capability activated (as in step 1 above), the FT-7900R will generate
a brief (0.1 second) DTMF tone according to your selection in step 4. This DTMF tone
is sent at the beginning of every transmission to establish or maintain the link to the
remote WiRES
TM
repeater.
7. To disable the WiRES
TM
access capability, press the
[ (
L
)]
key again.
You may access other Internet Linking Systems (including WiRES™ in the “FRG” mode)
that use a DTMF string for access.
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #14 (
DT WRTDT WRT
DT WRTDT WRT
DT WRT).
3. Press the
[
BAND
(
SET
)]
key momentarily, then load the
DTMF tones which you wish to use to establish an
Internet link (ask your repeater owner/operator if you don’t know the access numbers in
the network) into the desired DTMF Memory channel.
1) Rotate the DIAL knob to select the DTMF Autodialer
memory channel number (“
d-1d-1
d-1d-1
d-1” through “
d-16d-16
d-16d-16
d-16”).
2) Press the
[
BAND
(
SET
)]
key momentarily.
3) Rotate the DIAL knob to select the DTMF code, then
press the
[
BAND
(
SET
)]
key momentarily to move
the digit.
4) Repeat step (3) above to complete the DTMF string.
5) Press and hold the
[
BAND
(
SET
)]
key for 1/2 sec-
ond to save the new setting, then press and hold the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal
INTERNET CONNECTION FEATURE
60

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-7900R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-7900R in de taal/talen: Engels als bijlage per email.

De handleiding is 2,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info