478466
36
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
34 FT-7900R OPERATING MANUAL
Storing Independent Transmit Frequencies (“Odd Splits”)
1. Store the receiving frequency using the method already described.
2. Turn to the desired transmit frequency, then press and hold in the
[
V/M
(
MW
)]
key for
1/2 second.
3. Within ten seconds of pressing the
[
V/M
(
MW
)]
key, use the DIAL knob or microphone’s
[
UP
]
/
[
DWN
]
buttons to select the same memory channel number as used in step 1 above.
4. Press and hold in the PTT switch, then pressing and holding the
[
V/M
(
MW
)]
key for
1/2 second while holding the PTT switch to save the entry and exit to normal operation.
This will not cause transmission; instead, it signals the microprocessor that a separate
transmit frequency is being programmed into that memory register.
Whenever you recall a memory which contains indepen-
dently-stored transmit and receive frequencies, the “
indication will appear in the display.
If you set the CTCSS/DCS functions to the receiver frequency and transmit frequency indi-
vidually, the “Odd Splits” feature can be memorize the frequency/code individually for trans-
mit and receive.
Whenever you recall a memory which contains indepen-
dently-stored CTCSS/DCS functions, the decoder icon will
appear and the encoder icon will blink in the display.
To confirm the memorized frequency/code:
1. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to enter the Set mode.
2. Rotate the DIAL knob to select Menu #9 (
DCS.CODDCS.COD
DCS.CODDCS.COD
DCS.COD)
when the receiver CTCSS/DCS function is set to “DCS”,
or select Menu #44 (
TN FRQTN FRQ
TN FRQTN FRQ
TN FRQ) when the receiver CTCSS/
DCS function is set to “TONE SQUELCH”.
3. Press the
[
BAND
(
SET
)]
key momentarily to display the
memorized frequency/code for the receiver.
4. Press and hold in the
[
TONE
(
HM/RV
)]
key for 1/2 sec-
ond to display the memorized frequency/code for the
transmitter. You can confirm the Transmit and Receive
TONE/DCS by alternately press and holding of the
[
TONE
(
HM/RV
)]
key.
5. Press and hold in the
[
BAND
(
SET
)]
key for 1/2 second to exit to normal operation.
REGULAR MEMORY CHANNEL OPERATION
MEMORY OPERATION
: Receive TONE/DCS
: Transmit TONE/DCS
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-7900R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-7900R in de taal/talen: Engels als bijlage per email.

De handleiding is 2,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info