478466
30
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
28 FT-7900R OPERATING MANUAL
CTCSS TONE FREQUENCY
(
Hz
)
67.0 69.3 71.9 74.4 77.0 79.7
82.5 85.4 88.5 91.5 94.8 97.4
100.0 103.5 107.2 110.9 114.8 118.8
123.0 127.3 131.8 136.5 141.3 146.2
151.4 156.7 159.8 162.2 165.5 167.9
171.3 173.8 177.3 179.9 183.5 186.2
189.9 192.8 196.6 199.5 203.5 206.5
210.7 218.1 225.7 229.1 233.6 241.8
250.3 254.1 ––––
CTCSS OPERATION
Many repeater systems require that a very-low-frequency audio tone be superimposed on
your FM carrier in order to activate the repeater. This helps prevent false activation of the
repeater by radar or spurious signals from other transmitters. This tone system, called
“CTCSS” (Continuous Tone Coded Squelch System), is included in your FT-7900R, and is
very easy to activate.
CTCSS setup involves two actions: setting the Tone Mode and then setting of the
Tone Frequency. These actions are set up by using the [TONE(REV)] key and Set
mode #44 (TN FRQ).
1. Press the
[
TONE
(
REV
)]
key several times, so that
ENC” appears on the display; this activates the CTCSS
Encoder, which allows repeater access.
1) You may notice an additional “DCS” icon appearing while you press the
[
TONE
(
REV
)]
key in this step. We’ll discuss the Digital Code Squelch system
shortly.
2) You may notice the “REV TN” indication on the display; this means that the Re-
verse Tone Squelch system is active, which mutes your FT-7900Rs receiver when it
receives a call from the radio sending a matched CTCSS tone. The “DEC” icon will
blink on the display when the Reverse Tone Squelch system is activated.
2. Pressing the
[
TONE
(
REV
)]
key once more in above step will cause “ENC DEC” to
appear. When ENC DEC” appears, this means that the Tone Squelch system is active,
which mutes your FT-7900Rs receiver until it receives
a call from another radio sending out a matching CTCSS
tone. This can help keep your radio quiet until a specific
call is received, which may be helpful while operating in congested areas.
3. When you have made your selection of the CTCSS tone
mode, press and hold in the
[
BAND
(
SET
)]
key for 1/2
second to enter the Set mode, then rotate the DIAL knob
to select Menu #44 (
TN FRQTN FRQ
TN FRQTN FRQ
TN FRQ). This Menu selection allows setting of the CTCSS tone
frequency to be used.
4. Press the
[
BAND
(
SET
)]
key momentarily
to enable adjustment of the CTCSS fre-
quency.
5. Rotate the
DIAL knob
until the
display indicates the Tone Frequency you
need to be using.
6. When you have made your selection, press
CTCSS/DCS OPERATION
30

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-7900R bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-7900R in de taal/talen: Engels als bijlage per email.

De handleiding is 2,87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info