36015
68
Verklein
Vergroot
Pagina terug
1/80
Pagina verder
66 FT-7800R OPERATING MANUAL
Item
#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
Menu Item
APO
AR BEP
AR INT
ARS
BEEP
CLK.SFT
CWID
CW WRT
DCS.COD
DCS.N/R
DIMMER
DT DLY
DT SPD
DT WRT
EDG.BEP
HM/REV
HYPER
I NET
INT CD
INT MR
LOCK
MIC
NAME
NM WRT
PKT.MIC
PKT.SPD
PRG.PNL
PRG P1(ACC)
PRG P2(P)
PRG P3(P1)
PRG P4(P2)
RF SQL
RPT.MOD
PRI.RVT
RX MOD
S SRCH
SCAN
SCN MD
SHIFT
SKIP
SPLIT
SQL.TYP
STEP
TN FRQ
TOT
VFO.BND
WID.NAR
WX ALT
Function
Selects the Automatic Power Off time (time before power goes off).
Selects the ARTS beep mode.
Selects the Polling Interval during ARTS operation.
Activates/deactivates the Automatic Repeater Shift feature.
Enables/disables the beeper.
Shifting of CPU clock frequency.
Enables/disables the CW identifier during ARTS operation.
Stores your callsign into the CW identifier.
Setting the DCS code.
Selects “Normal” or “Inverted” DCS coding.
Setting of the Display brightness level.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Loading of the DTMF Autodialer Memories.
Enables/Disables the Band-edge beeper while selecting the frequency
by the DIAL knob.
Selects the alternate function of the
[
TONE
(
HM/RV
)]
key and pri-
mary function of the
[
V/M
(
MW
)]
key.
Enables/disables the Automatic Writing feature for the Hyper Memory.
Selects the Internet Connection mode.
Selects the Access Number (DTMF digit) for WIRESTM operation.
Selects the Access Number (DTMF code) for non-WIRES
TM
Internet
Link System access.
Selects the Control Locking lockout combination.
Selects the microphone type to be used.
Toggle the display indication of the Memory/Home channel between
“frequency” and the channel’s “Alpha-numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory/Home channels.
Enables/disables the microphone input during Packet operation.
Sets the transceiver’s circuitry for the Packet baud rate to be used.
Programming the alternate (press and hold in) function of the front
panel’s
[
LOW
(
ACC
)]
key.
Programming the microphone’s
[
P1
]
/
[
ACC
]
button assignment.
Programming the microphone’s
[
P2
]
/
[
P
]
button assignment.
Programming the microphone’s
[
P3
]
/
[
P1
]
button assignment.
Programming the microphone’s
[
P4
]
/
[
P2
]
button assignment.
Adjust the RF SQL threshold level.
Sets the Repeater Shift Direction.
Enables/Disables the Priority Revert feature.
Selects the Receiving mode.
Selects the Smart Search Sweep mode.
Selects the Scan-Resume mode.
Selects the Memory Scan channel-selection mode.
Sets the magnitude of the Repeater Shift.
Selects what action will happen on a “flagged” Memory Channel.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Sets the Synthesizer steps.
Sets the CTCSS Tone Frequency.
Sets the Time-Out Timer.
Selects or disables the VFO band edge limiting for the current band.
Reducing the MIC Gain (and Deviation).
Enables/disables the Weather Alert Scan.
Available Values
(
Default: Bold Itaric
)
OFF/0.5 H ~ 12.0 H
INRANG/ALWAYS/OFF
25sec/15sec
ARS.ON/ARS.OFF
(
)
KEY/KEY+SC/OFF
SFT.ON/SFT.OFF
TX ON/TX OFF
---
104 DCS codes
(
023
)
TRX N/RX R/TX R/TRX R
DIM 1/DIM 2/DIM 3/DIM.OFF
50MS/100MS/250MS/
450MS/750MS/1000MS
50MS/75MS/100MS
---
BEP.ON/BEP.OFF
REV/HOME
MANUAL/1-AUTO/AUTO
INT.COD/INT.MEM
CODE 0 ~ 9/A/B/C/D/E/F
(
CODE 1
)
d- 1 ~ d16
LK KEY/LK DIAL/LK K+D/
LK PTT/LK P+K/LK P+D/
LK ALL/LK OFF
MH-48/MH-42
FREQ/ALPHA
---
MIC.ON/MIC.OFF
1200bps/9600bps
WX/REV/RPTR/
SQ.OF/LOCK/DIM
SQ.OF/TCAL/SSCH/ARTS/WX/
TN.FQ/DCSC/RPTR/PRI/
LOW
(
#31
)
/TONE
(
#30
)
/MHz/REV/
HOME/BAND
(
#28
)
/V/M
(
#29
)
/SCAN
OFF/S-2 ~ 9/S-FULL
RPT.OFF/RPT.--/RPT.+
(
)
RVT.ON/RVT.OFF
AUTO/FM/AM
SINGLE/CONT
TIME/BUSY/HOLD
MEM/ONLY
0.00 ~ 99.95 MHz
(
)
OFF/SKIP/ONLY
SPL.OFF/SPL.ON
OFF/ENC/ENCDEC/
REV TN/DCS
AUTO/5.0 k/10.0 k/12.5 k/
15.0 k/20.0 k/25.0 k/
50.0 k/100 k
50 CTCSS Tones
(
100 Hz
)
1 ~ 30 minutes or OFF
(
6 minutes
)
BND.ON/BND.OFF
WIDE/NARROW
ALT.ON/ALT.OFF
MENU
(
“SET
)
MODE
:
Depends on the band of operation.
68

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-7800

Zoeken resetten

  • graag weten waarvoor de nrs 1 t ot 5 dienen yausu ft-7800 Gesteld op 3-3-2017 om 22:04

    Reageer op deze vraag Misbruik melden
    • De knoppen 1 t/m 5 op het front zijn sneltoetsen
      Heb je de ontvanger op een bepaalde frequentie staan en je drukt 1 van deze 5 toetsen een 2 tellen in dan wordt de frequentie bij deze toets onder dat nummer opgeslagen. Je hoort een piepje ter bevestiging . Daarna kun je deze nieuwe ingestelde frequentie door het kort indrukken van de knop opgeroepen.
      Succes

      Tjerk
      PE1IOC
      Geantwoord op 4-3-2017 om 10:30

      Waardeer dit antwoord (2) Misbruik melden
  • hallo ik ben op zoek naar de nederlandse handleiding
    van de yeasu ft7800 wie kan mij helpen Gesteld op 6-9-2010 om 23:20

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-7800 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-7800 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info