444588
18
Verklein
Vergroot
Pagina terug
1/104
Pagina verder
Page 16 FT-450 OPERATION MANUAL
HOW TO USE THE
[
VOICE/C.S
]
SWITCH
You may set the
[
VOICE/C.S
]
button function to one of 52 functions via Menu Item “PNL-C.S”.
To assign a function to the [VOICE/C.S] button:
1. Press and hold the
[
F
]
button for one second to enter the
Menu Mode. The “ ” icon will appear on the display.
2. Rotate the
[
DSP/SEL
]
knob to select Menu Item “PNL-C.S”.
3. Press the
[
DSP/SEL
]
knob to enable adjustment of
this Menu Item. The “ ” icon will be blinking.
4. Rotate the
[
DSP/SEL
]
knob to select the desired function.
5. Press the
[
DSP/SEL
]
knob. The “ ” icon returns
to appear continuously.
6. Press and hold the
[
F
]
button for one second to return
to normal operation.
[
VOICE/C.S
]
button
[
F
]
button
[
DSP/SEL
]
knob
EASY OPERATION
Item Function
MONI Activates the Monitor function.
N/A No Function.
P/B Activates the Digital Voice Recorder.
PLAY1 Send the CW message, which is memorized in BEACON TEXT 1.
PLAY2 Send the CW message, which is memorized in BEACON TEXT 2.
PLAY3 Send the CW message, which is memorized in BEACON TEXT 3.
QSPL Activates Quick Split Operation
SPOT Generates a CW Spot Tone while pressing the
[
VOICE/C.S
]
button when using CW mode.
SQLOFF Opens the noise squelch while pressing the
[
VOICE/C.S
]
button.
SWR Transmits a 10 watts carrier (CW mode) to measure the SWR ratio while pressing the
[
VOICE/C.S
]
button.
TXW Monitor the transmit frequency while pressing the
[
VOICE/C.S
]
button when Split Frequency operation is engaged.
VCC Display the DC supply voltage while pressing the
[
VOICE/C.S
]
button.
VOICE2 Announces the current S-meter reading, operating frequency (with resolution to the displayed 100 Hz digit), and
operating mode.
VM1MONI Play back the voice message, which is memorized in Voice Memory 1.
VM1REC Store the voice message into Voice Memory 1.
VM1TX Send the voice message, which is memorized in Voice Memory 1.
VM2MONI Play back the voice message, which is memorized in Voice Memory 2.
VM2REC Store the voice message into Voice Memory 2.
VM2TX Send the voice message, which is memorized in Voice Memory 2.
DOWN Decreases the VFO frequency by one step or moves the memory channel to the next-lowest channel while pressing
the
[
VOICE/C.S
]
button.
FAST Set to the same function as the front panel’s
[
FAST
]
button.
UP Increases the VFO frequency by one step or moves the memory channel to the next-highest channel while pressing
the
[
VOICE/C.S
]
button
DSP Set to the same function as the front panel’s
[
DSP
]
button.
ATT/IPO Set to the same function as the front panel’s
[
ATT/IPO
]
button.
NB Set to the same function as the front panel’s
[
NB
]
button.
AGC Set to the same function as the front panel’s
[
AGC
]
button.
MODEDN Set to the same function as the front panel’s
[
MODE
]
button.
MODEUP Set to the same function as the front panel’s
[
MODE
]
button.
DSP/SEL Set to the same function as the front panel’s
[
DSP/SEL
]
button.
KEYER Set to the same function as the front panel’s
[
KEYER
]
button.
CLAR Set to the same function as the front panel’s
[
CLAR
]
button.
BANDDN Set to the same function as the front panel’s
[
BAND
]
button.
BANDUP Set to the same function as the front panel’s
[
BAND
]
button.
A=B Set to the same function as the front panel’s
[
A=B
]
button.
A/B Set to the same function as the front panel’s
[
A/B
]
button.
LOCK Set to the same function as the front panel’s
[
LOCK
]
button.
TUNE Set to the same function as the front panel’s
[
TUNE
]
button.
VOICE Announce the current operating frequency
(
with resolution to the displayed 100 Hz digit
)
and operating mode.
MW Copies the current operating data from the VFO into the currently selected memory channel.
V/M Toggles frequency control between VFO and memory system.
HOME Recall the “Home”
(
favorite frequency
)
channel.
RCL Recall the QMB
(
Quick Memory Bank
)
memory.
VOX Activate the VOX
(
automatic voice-actuated transmitter switching
)
feature.
STO Copies operating data into QMB
(
Quick Memory Bank
)
Memory.
STEP Enables the setting of the frequency step of the
[
DSP/SEL
]
knob by the
[
DSP/SEL
]
knob.
SPLIT Activates split frequency operation between VFO-A and VFO-B.
PMS Engages Programmable Memory Scan
(
PMS
)
.
SCAN Initiates the upward scanning of VFO frequencies or memory channels
)
.
MENU Engage the “Menu” mode.
DIMMER Enables adjustment of the display dimmer level by the
[
DSP/SEL
]
knob.
MTR Change the meter function in the transmit mode.
USER This parameter is for future expansion of the transceiver’s capabilities. Do not select this parameter.
18

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Yaesu-FT-450

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu FT-450 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu FT-450 in de taal/talen: Engels als bijlage per email.

De handleiding is 9,48 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info