674722
32
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
DR-2X / DR-2XE Operating Manual30
13. Voice messages
Voice messages are a very useful feature to communicate messages to all club members. For example, when
you plan a breakfast meeting on Sunday morning, if you record the location and time with the remote control,
the message is transmitted from the repeater at a predetermined interval and number of times. For example,
it is possible to set the message to announce ten times at an hourly interval.
Voice Message for C4FM Digital Mode
Remote control voice message using FTM-400D, FTM-100D or FTM-3200D
Recording, playback, and erasing are performed with the “PTT” “P2” “P3” keys of the transceiver’s microphone.
In order to record a message, first register the transceiver DP-ID on the DR-2X/DR-2XE repeater.
1 Tune the transmit frequency to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
2 Set the transceiver to the C4FM digital mode, then press and hold the “” key on the microphone.
To record a message:
Press the PTT to record. When you release the PTT, recording will end automatically and “REC
Completed” will be displayed on the screen of the mobile transceiver.
Recording is possible for a maximum of 60 seconds.
To play and transmit the message:
Press the P2 key. The message will transmit once and “PLAY Completed” will be displayed on the screen
of the mobile transceiver.
To erase a recorded message:
When the P3 key is pressed, the recorded contents are deleted and “CLEAR Completed” is displayed on
the screen of the mobile transceiver.
3 Press the “” key on the microphone to return to the normal operation.
Voice Message for Analog FM
Send 4-digit DTMF codes from the transceiver's microphone to record, play, or erase a voice message.
1 Tune the transmit frequency to the uplink frequency of the CH-B side of the DR-2X/DR-2XE.
2 Set the transceiver to the analog FM mode.
To record a message:
While transmitting, press the “” key, then input the preset 4-digit command (initial value 5555) from
the microphone. When the PTT is released, a CW code of “R” is sent on the downlink frequency. Press
the PTT to record. When you release the PTT, recording stops automatically, and the CW code of “R” is
transmitted on the downlink frequency.
z If a CW code of “NG” is returned when recording starts, the recording area of the FVS-2 is full. Execute the erase
operation to clear the internal memory area.
z Recording is possible for a maximum of 60 seconds.
To play and transmit the message:
While transmitting, press the “” key, then input the preset 4-digit command (initial value 6666) from the
microphone. Once the message is transmitted, a CW code of “R” is sent on the downlink frequency.
To erase a recorded message:
While transmitting, press the “” key, then input the preset 4-digit command (initial value 7777) from
the microphone. The recorded content is erased and the CW code of “R” is transmitted at the downlink
frequency.
32

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu DR-2X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu DR-2X in de taal/talen: Engels als bijlage per email.

De handleiding is 14,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info