674722
12
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
DR-2X / DR-2XE Operating Manual10
2. Set up Operation Mode
When the Power Switch is turned ON, Operation Mode screen appears.
This screen is for normal operation.
The DR-2X/DR-2XE could be set up with two frequencies for the uplink and the downlink and also different
operation modes for each frequency.
Normal Dual CH Operation
In Normal Duel Channel Operation, the DR-2X/DR-2XE accepts the uplink channel on a first come basis, and
the later signal on the other channel is not repeated until the first channel is released.
Priority Dual CH Operation
In Priority Dual Channel Operation, the DR-2X/DR-2XE always repeats the Priority Channel, regardless of any
signals on the other channel (see page 13 “Priority Channel”).
To setup priority CH, touch the area between RX and TX on the channel you want to set the priority channel.
To reset, touch the area again.
Single CH Operation
If you do not need the second CH on DR-2X/DR-2XE, just enter any frequency on CH-B and do not connect
the uplink antenna to RX ANT B.
CH-B can be used exclusively for repeater control without any repeater operation. In this case, the downlink
frequency of CH-B is not displayed.
To setup CH-B for control only, touch the area between RX and TX on the CH-B until CNTL appears.
To reset, touch the area again.
CH - B
CH - A
TX
(
downlink
)
RX
(
uplink
)
TX
(
downlink
)
RX
(
uplink
)
To receive Analog FM and Digital C4FM signals simultaneously, set RX to
[
AUTO
]
mode.
This mode may activate the AMS (Automatic Mode Select) function, then receive (uplink) and transmit
(downlink) signals of the Analog FM and Digital C4FM. The default setting is
[
AUTO
]
.
If operating the repeater using the DG-ID and connecting multiple repeaters, select the
[
DIGITAL
]
in the
[
FIX
]
mode.
The DG-ID function is not available because the Analog FM mode does not include the DG-ID information.
In the C4FM digital mode, three digital modes are recognized automatically. In normal C4FM digital, it will be
in V/D mode.
Touch
[
AUTO
]
or
[
FIX
]
in the operation mode screen area to set the operating mode.
[
AUTO
]
Touch here to activate the AMS function. The mode switches automatically according to the
received/transmitted signal types.
[
AUTO
]
is turned red,
[
DIGITAL
]
automatically light up.
[
FIX
]
Touch here to activate the FIX mode.
[
FIX
]
is turned yellow.
Note that when selecting the [FIX]
mode, that other mode signals may not be received.
Either
[
VOICE WIDE
]
or
[
DATA
]
modes are automatically recognized in the C4FM uplink Signal, and receive
mode is changed to fit the signals, so no setting is necessary.
[
DIGITAL
]
Normal C4FM digital mode
[
VOICE WIDE
]
High-rate voice C4FM digital mode
[
DATA
]
High-speed data C4FM digital mode
[
FM
]
Analog FM communication mode
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Yaesu DR-2X bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Yaesu DR-2X in de taal/talen: Engels als bijlage per email.

De handleiding is 14,18 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info