574682
65
Verklein
Vergroot
Pagina terug
1/68
Pagina verder
Page 65
7.4 Connecting your Y-cam directly to a Computer
You can also connect the Y-cam directly to a computer. Please note that in this mode you will not be able to view your
Y-cam from anywhere else apart from the computer you are currently using.
Connect one end of the network cable in to the Y-cam Network Connection socket, and plug the other end in to a spare
network port on your computer.
Connect the included power adapter to the power port on the camera and the other end into an electrical socket. Do
not turn the power on at this time.
You must then assign your computer an IP address so it can talk easily to the camera.
On a PC :
1. Open the Control Panel and double click on “Network Connections” then right click on your “Local Area
Network” connection, and click Properties. Be sure to select the Network icon that corresponds to where you
have plugged the Y-cam in to so this would not be listed as a Wireless, Wi-Fi or Bluetooth Network.
2. Select “Internet Protocol (TCP/IP)” then click Properties.
3. Take note of your current TCP/IP Settings and then click on “Use the following IP settings”
4. In the “IP Address” Field type in the number 192.168.1.20
5. In the Subnet Mask” type in 255.255.255.0
6. In the “Default Gateway” type 192.168.1.200 (The camera will automatically assign itself this IP address when no
DHCP server is present)
7. Leave DNS server settings blank.
8. Click “OK” then “Close” to apply these settings.
9. Turn the power on to the Y-cam.
10. The Connectivity Status indicator on the front of the camera will light up.
You can now proceed to the Software Installation section.
On a Mac :
1. Open “System Preferences” from the dock, and then select “Network” to edit your network settings. As the Y-
cam is connected to your Mac using a cable we must choose the “Built-in-Ethernet” option. Select “Built-in
Ethernet” and click the “Configure” button. Make a note of your current TCP/IP Settings.
2. Select “Manually” from the IPv4 drop-down box at the top of the dialog, and then enter these settings:
IP Address : 192.168.1.20
Subnet Mask : 255.255.255.0
Router/Default Gateway : 192.168.1.200
DNS Servers: Leave blank, not important at this stage.
Search domains: Optional, leave blank, not important.
3. The click “Apply Now”.
4. Turn the power on to the Y-cam.
5. The Connectivity Status indicator on the front of the camera will light up.
You can now proceed to the Software Installation section.
65

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Y-cam Bullet HD 1080 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Y-cam Bullet HD 1080 in de taal/talen: Engels als bijlage per email.

De handleiding is 2,23 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info