730169
3
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
Standard assembly (B)
6. While holding the functional band on the same length
with both hands, thread it into the appropriate trough at
the base of the delivery for the device, slightly pulling
the elastic band.
7. Cross the elastic band, then gently circle it around
the back groove.
8. Insert one end of the rope into a special socket. Wind
the cable around the special coil, and then insert the
other end into the remaining connector.
9. Place the device with the protruding part down on the
special feet, then insert the coil into the corresponding
hole.
When transporting the device in its
assembled state, always hold the device
holder with a special handle.
Standard assembly (А)
1. Set the stand for the devices with the logo upwards.
2. Insert the stops for the rack and push-ups from
the oor into the roller for pumping the press on both
sides.
3. Align the devices connected together and insert
them into the corresponding holes in the device stand.
4. Lift the device stand up, holding the side handles
to x the position of the stop for the stand and the
push-ups from the oor and the roller for pumping the
press.
5. Place the device vertically on the special feet, with
the back side facing you.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Xiaomi Move It - Smart Multi-Purpose Fitness Device bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Xiaomi Move It - Smart Multi-Purpose Fitness Device in de taal/talen: Engels als bijlage per email.

De handleiding is 3,21 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info