730159
3
Verklein
Vergroot
Pagina terug
1/6
Pagina verder
User’s manual
Wiring:
1. Turn o the power. During installation, replacement or disassembly of the
luminaire, make sure that there is no current supply. Otherwise, in case of
touching the wires, there is a risk of electric shock, which can lead to human
casualties!
2. Ensure that there is a reliable ground connection at the lamp installation
site. The lamp can also be used if there is no ground connection, however,
any contact with the device is prohibited during operation. Otherwise, it may
result in electric shock.
3. Alternate connection of a three-core cable - phase, zero and grounding
wire. Use a Phillips screwdriver # 2 for xing. After xing all the cogs, slightly
slide the lamp to check the reliable contact of the wires! To prevent the
formation of a shadow in the lamp, remove the excess ends of the cables
near the connecting terminal, the wires must t snugly against the lamp
base.
Top panel:
1. Turn the cover clockwise.
The lighting device must be grounded!
2. Ensure that the plafond is properly installed and securely locked.
Notes:
1. The lighting device must be installed in an installation method, all
contacts must comply with the electrical standard of the IEEE or the
national standard.
2. During installation, changing or disassembling the device, make sure that
there is no current supply. Otherwise, in case of touching the wires, there is
a risk of electric shock, which can lead to human casualties!
3. This light can be controlled by a remote control or mobile application.
Turning o the lamp using the remote control or the mobile application does
not mean that the device is de-energized. In this case, it is forbidden to
touch, change, correct the location of the lamp or disassemble it, otherwise
an accident may occur.
4. The plafond of the lamp is fragile, gently follow the installation!
User’s manual
02. Using a Lamp
- On / O: Use the wall switch to turn on / o the light.
- Changing the luminescence mode: when on, for 3 seconds, switching to
the next glow mode (this function can be disabled in the APP).
- Night light:
Method 1: Turn on this glow mode in the APP.
Method 2: Press and hold the power button on the remote control for 3
seconds.
Method 3: If there is a network connection in a dark room, from 23:00
to 6:00 AM click on any button to turn on the night light. Please read the
operating instructions or the operating instructions of the remote control
carefully.
- Automatic color temperature control: after connecting to the mains, the
lamp can automatically adjust the color temperature according to local time
and latitude / longitude. If you adjust the brightness of the glow and the
color temperature in manual mode, the automatic color temperature control
function is turned o. If you want to turn this function back on, you need to
turn the lamp o / on again with the wall switch or turn it on in the APP.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Xiaomi MiJia Philips ZhiRui EyeCare Smart Ceiling Lamp bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Xiaomi MiJia Philips ZhiRui EyeCare Smart Ceiling Lamp in de taal/talen: Engels als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info