584861
4
Verklein
Vergroot
Pagina terug
1/7
Pagina verder
P. 5 P. 6
Controlling RoboMe™ Roam mode
To turn, the robot will spin on the spot until the button is released. Therefore, the LEFT arrow button will
make it move counter-clockwise and the RIGHT button will make it move clockwise, regardless of the
direction the robot faces.
Obstacle and Edge Detection
As RoboMe™ moves around, it will detect obstacles in range directly in front of it. Upon detection, it will
stop and make a sound. It will do the same when it detects an edge. The robot can see highly reflective
surfaces, such as white walls and floors or mirrors and might perceive them to be an edge from which it
can fall.
NOTE: The robot cannot detect obstacles or edges to the side or behind it.
Modes
RoboMe™ comes with a few modes that do not require connection to a smart device and app.
Demo Mode
RoboMe™ has two demo routines. To activate a demo, point the remote controller at the robot and press
the DEMO button. To stop, press any button on the remote controller.
NOTE: RoboMe™ moves around during demo routines. Ensure the surrounding area is free from obstacles and edges.
Guard Mode
In Guard Mode, RoboMe™ will scan the environment directly in front of it, up to about 3 feet (1 meter)
away. The robot will sound an alarm if it detects movement of a large person or object within that range.
NOTE: If you give RoboMe™ other commands while in Guard Mode, the robot will exit Guard Mode.
To activate Guard Mode:
1. Press the GUARD button on the remote controller.
2. The robot will perform a scan of the immediate environment about 3 feet (1 meter) in front of it.
3. RoboMe™ will make different comments to show it is scanning the area. If RoboMe™ detects any
movements, it will sound an alarm.
4. After about 30 minutes the robot will exit Guard Mode and wait for a command. If you do not enter a
command within about five minutes, it will enter Standby Mode.
5. To exit Guard Mode, press the GUARD button on the remote controller or give another command.
Roam Mode
In Roam Mode, RoboMe™ explores the environment without your commands, commentating and detecting
obstacles and edges along the way. To enter Roam Mode, press the ROAM button on the remote controller.
After approximately ten minutes, RoboMe™ will exit Roam Mode. If you do not enter a command within
about five minutes, it will enter Standby Mode. To exit Roam Mode before this, give another command.
Standby Mode
RoboMe™ is equipped with a Standby Mode. If you do not interact with it for approximately 5 minutes,
the robot will make a comment and enter Standby Mode.
During Standby Mode both object and edge detection will function but the robot’s eye and
mouth LEDs switch off. The mood indicator LED fades to white and pulses more slowly.
To wake RoboMe™ from Standby Mode, press any button on the Remote Controller or activate any of
its sensors.
Sleep Mode
If RoboMe™ is left for approximately 35 minutes more (approximately 40 minutes altogether) it will enter
Sleep Mode after making a comment. The mood indicator LED will turn off along with the object and edge
sensors. To wake RoboMe™ from Sleep Mode, turn it OFF and then ON again using the power switch
located on the underside.
NOTE: If you are done playing with RoboMe™, turn it off using the power switch located on the underside.
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw WowWee 0811 RoboMe bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van WowWee 0811 RoboMe in de taal/talen: Engels als bijlage per email.

De handleiding is 2,51 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van WowWee 0811 RoboMe

WowWee 0811 RoboMe Gebruiksaanwijzing - Deutsch - 12 pagina's

WowWee 0811 RoboMe Gebruiksaanwijzing - Français - 12 pagina's

WowWee 0811 RoboMe Gebruiksaanwijzing - Espanõl - 7 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info