723921
19
Verklein
Vergroot
Pagina terug
1/20
Pagina verder
Owner’s Manual of Lawn Mowing Robot EN
19
Landroid
®
is starting to have
shorter run-times between
charges.
Something is clogging in the Blade
Disc.
Take off the Blade Disc and clean it
The grass is too high and too thick.
Landroid
®
is shaking heavily.
Check the Blade Disc and blades, remove
debris and foreign objects from the blades
and Blade Disc.
The battery may be exhausted or old. Replace battery.
Landroid
®
is not operating at the
correct time.
The clock is not set to the correct
time.
Set the clock to the correct time by using
App.
Programmed cutting times for
Landroid
®
are not correct.
Change the time settings for the mower to
start and stop.
Landroid
®
cannot correctly dock
with the Charging Base
Environmental influences Restart Landroid
®
.
Poor connection caused by debris on
the Charging Strip.
Clean the Contact Pins located on the
Charging Base and the Charging Strip on
Landroid
®
using a cloth.
The Green light on the Charging
Base turns ON before charging
is complete.
The charging base is overheating, the
battery indication light flashes red.
Place the charging base in a shady area or
wait until the temperature has cooled down.
Landroid
®
runs outside the
boundary wire. Landroid
®
does
not mow an area within a
boundary wire zone. Landroid
®
reverses or rotates erratically
near the boundary wire.
The boundary wire of another
Landroid
®
or another robotic mower is
positioned too closely.
Ensure your Landroid
®
Boundary Wire has at
least 1m of space between the neighboring
boundary wire.
The boundary wire has been installed
with tight corners.
Check the boundary wire to ensure the
corners are smooth.
In wet conditions, the boundary wire
electric signal may leak were wire has
been joined or repaired.
Check boundary wire joints. Insulate to
provide a fully waterproof connection.
There is boundary wire electric signal
leakage due to broken insulation.
Repair damaged boundary wire insulation
with connectors.
The cutting area is larger than the
allowable cutting area for Landroid
®
.
Contact service agent.
Landroid
®
wheels skid or
damage lawn.
Foreign obstacles, such as twigs
and branches may be lodged under
Landroid
®
.
Remove foreign objects from underside of
Landroid
®
.
The lawn is too wet. Wait until lawn has dried.
Landroid
®
exits the boundary
wire due to high speed when
going down a hill.
The Boundary Wire is placed on a
slope steeper than 17% (10°).
Reposition the Boundary Wire away from
slopes that are steeper than 17% (10°).
Please refer installation manual for details.
Environmental Protection
Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your Local Authority or retailer for recycling advice.
19

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Worx-WR105-SI

Zoeken resetten

  • Ik heb een landgoed worx W R105SI. Het laadstation brandt groen. Het lampje gaat van de landroid gaat rood aan en uit en dan niets meer. Laadt dus niet op.
    Alles schoongemaakt, batterij uitgehaald.
    Op mijn app op telefoon verschijnt in oranje kleur: onbekende

    Wat is er aan de hand?
    Mvg
    D.G Gesteld op 18-4-2021 om 16:58

    Reageer op deze vraag Misbruik melden

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worx WR105 SI bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worx WR105 SI in de taal/talen: Engels als bijlage per email.

De handleiding is 4,73 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Worx WR105 SI

Worx WR105 SI Installatiehandleiding - Nederlands - 19 pagina's

Worx WR105 SI Gebruiksaanwijzing - Nederlands - 21 pagina's

Worx WR105 SI Installatiehandleiding - English - 19 pagina's

Worx WR105 SI Installatiehandleiding - Français - 19 pagina's

Worx WR105 SI Gebruiksaanwijzing - Français - 21 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info