724615
28
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
Air Brush Kit
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. TG212E • 07/2019 • 10278
(toll free)
26
Problem
Possible Cause Solution
Insucient
pressure.
Damaged air hose (11).
Loose air connections.
Loose cylinder body cover
screws.
Replace the air hose (11).
Check and tighten loose
air connections.
Tighten cylinder body cover screws.
Knocks while
compressor is
loading.
Defective connection rod
bearings.
Defective wrist pins and
wrist pin bearing.
Take the compressor to one of our
qualied Service Agents for review / repair.
Take the compressor to one of our
qualied Service Agents for review / repair.
Motor does
not work
Damaged power cord.
Defective electrical wiring.
No electrical power.
Power switch is defective.
Motor is too hot.
Check the regulator has not
been adjusted too low.
Pressure is at the shut off
pressure.
Take the compressor to one of our
qualied Service Agents or a qualied
technician for review / repair.
Take the compressor to one of our
qualied Service Agents for review / repair.
Plug the power cord (3) into a working
220 volt mains power socket.
Take the compressor to one of our qualied
Service Agents for review / repair.
Turn O the compressor at the mains
switch, remove the plug and Allow the
motor to cool for 15 minutes.
Adjust the regulator 3 turns in a clockwise
direction to increase pressure and depress
the air brush trigger.
Release air pressure by operating the
air brush.
Motor makes
strange noises
Loose or damaged bearings.
Loose connection rod screws.
Take the compressor to one of our qualied
Service Agents for review / repair.
Motor running but
no air pressure
Check the air intake lter.
If motor is operating continually
with no pressure and air intake
is clear.
Ensure the lter is not blocked or the holes
in the air lter cover are not blocked.
Take compressor to service agent
for review.
Spray pattern poor Airbrush paint outlet nozzle is
dirty or blocked.
Loose air connections.
Paint is too thick.
Replace or clean the paint outlet nozzle.
Check and tighten any loose air
connections.
Mix appropriate thinner into the paint.
Suddenly stops
working
Bad valve.
Loose or damaged bearings.
Take the compressor to one of our qualied
Service Agents for review / repair.
Plug compressor into alternate electical
power source.
For all other issues, please contact Customer Service on 1300 889 028
or email info.aldi@positecgroup.com
Troubleshooting
28

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Workzone TG212E bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Workzone TG212E in de taal/talen: Engels als bijlage per email.

De handleiding is 4,97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info