734948
10
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
18 19
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
+353 (0) 19022605
GB
www.coreservice.co.uk
AFTER SALES SUPPORT
IRE
+353 (0) 19022605
GB
Q1W-SP14-1900A
Q1W-SP14-1900A
+44 (0) 190 472 7501
+44 (0) 190 472 7501
Pull the nozzle head forward to lower the pressure and push the nozzle head back to
raise the pressure. (Figure 15)
By turning the nozzle head through 180°, you can adjust the width of the jet from
spot jet to at jet:
Turn the nozzle head counterclockwise to set a spot jet. The further you turn the
nozzle head in a clockwise direction, the wider the flat jet becomes. (Figure 16)
NOTE
The spot jet is especially suitable for cleaning very soiled, narrow places,
whereas the at jet is ideal for cleaning wide areas.
Using the turbo lance
The turbo lance (9) creates a rotating jet of water which can be used to remove
stubborn dirt.
ATTENTION
When you use the turbo lance, there is a very great risk of damaging sensitive
surfaces. Apply it carefully, starting o with a large working distance and
reducing it as required.
Stop the machine and switch the ON/OFF switch to OFF.
Press the trigger on the spray gun briefly to reduce the system pressure.
Insert the turbo lance instead of the spray lance. (Figure 4)
Using the rotating brush
The rotating brush (8) is a tool for cleaning surfaces with care. The brush is driven here
by the high-pressure jet, and the water only strikes the surface being cleaned at low
pressure.
The cleaning eect is achieved by the action of the brush, and the loosened dirt is
washed away by the water.
Stop the machine and switch the ON/OFF switch to OFF.
Press the trigger on the spray gun briefly to reduce the system pressure.
Insert the rotating brush instead of the spray lance or the turbo lance.
(Figure 5)
Automatic feed of detergents
WARNING
Only use the detergents supplied or recommended by the manufacturer.
Thesafety of the machine may be adversely aected if you use other
detergents or chemicals.
Following direct contact between the detergent and your skin or mucous
membrane, rinse with lots of clear water and seek medical attention,
ifnecessary.
This high-pressure washer is equipped with a device for automatically feeding
detergents to the jet of water. Procedure for using this function:
Lock the trigger on the spray gun by flipping the yellow safety catch up until it
becomes engaged. (Figure 13)
Remove the sealing cap from the detergent tank (1) on the back of the machine and
pull the hose out. (Figure 14)
Take the detergent tank o the bracket and ll it with detergent.
Place the detergent tank back onto the bracket, reinsert the hose and replace the
sealing cap.
Fit the adjustable spray lance (10) onto the spray gun.
Set the nozzle head to the low pressure position by pulling it forward. (Figure 15)
Disengage the safety catch and press the trigger on the spray gun to start work.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Workzone Q1W-SP14-1900A bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Workzone Q1W-SP14-1900A in de taal/talen: Engels als bijlage per email.

De handleiding is 4,77 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Workzone Q1W-SP14-1900A

Workzone Q1W-SP14-1900A Gebruiksaanwijzing - Deutsch - 33 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info