724625
15
Verklein
Vergroot
Pagina terug
1/16
Pagina verder
24V Lithium-ion Cordless Drill with Hammer Action
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL: №. 2024001 • 02/2019 • 63524
(toll free)
AFTER SALES SUPPORT
(toll free)
e-mail: info.aldi@positecgroup.com1300 889 028
24V Lithium-ion Cordless Drill with Hammer Action
MODEL: №.2024001 • 02/2019 • 63524
26 27
Trouble Shooting Specications
Specications
Motor: 24 V
Low speed:
n
0
-Lo = 0 – 400 min-
1
High speed: n
0
-Hi = 0 – 1550 min-
1
Impact Frequency: 0-6,000 / 0-22,500 BPM
Drill/driver diam Ø: - Wood 30 mm
- Steel 13 mm
- Non aggregate materials 13mm
Chuck: 13 mm Keyless
Battery 2024001-BAT: 24 V
1.5Ah/Li-Ion
Charger Adaptor: Model: 2024001-CBA
Input: 100-240V~ 50-60Hz 0.5A
Output: 26.0 V , 0.45A
Plug Pack Charger: Model#: IVP 2600-0450WS
Charging time: Ready for use in 3-5 Hours
Product Dimensions: 220mm x 225mm x 75mm (L x W x H)
(Drill/driver with battery pack tted)
Your 24V Lithium-Ion Drill with Hammer Function product complies
with the following Standards:
Certication Standard Directive
CE-MD&GS EN 60745-1:2009+A11:2010; Directive 2006/42/EC
EN 60745-2-1:2010
CE-EMC (Machine) EN 55014-1:2006+A1+A2, Directive 2014/30/EU
EN 55014-2:2015
CE-EMC EN 55014-1:2006+A1+A2, Directive 2014/30/EU
(Battery pack & Charger) EN 55014-2:2015,
EN 61000-3-2:2014,
EN 61000-3-3:2013
Variance AS/NZS 60745.1:2009;
AS/NZS 60745.2.1:2009
Charger:
Safety Report/s: AS/NZS 60335.2.29 :2009 Inc A1-2
Certication SAA-141627-EA
EMC EN55014-1+A1:2009+A2:2011
Meps AS/NZS4665.1:2005+A1:2009
How do I select hammer function?
Rotate the function selection collar (3) until the Hammer symbol aligns with the triangular
indicator.
How do I select drill function (Non Hammer)?
When using the drilling function the torque control has no eect to the output of the
drill. The drill function (15) is used when using the drill to drill holes in metal, non ferrous
material, wood, plastic and similar materials. Rotate the function selection collar (3) so
the symbol of the drill bit (15) aligns with the triangular indicator on the top of the drill
housing.
How do I select screw / driver function?
Rotate the function selection collar (3) so to align the screw symbol (14) with the triangular
indicator on the top of the drill housing. To adjust the torque setting, rotate the torque
setting collar (2). The higher the number, the higher the output torque. Align the required
torque setting number with the triangular indicator on the top of the drill.
Torque setting is 11.
What is the function of the Forward / Reverse switch?
This switch (6) will allow you to change the direction of the motor while the trigger switch
is not depressed.
Drill/driving uses the forward mode. The reverse mode is intended for the removal of
screws and assisting to remove jammed drill/driver bits.
What do I do if I have an issue with my drill?
If you have any issues with your drill/driver, please contact our Customer Service line on
1300 889 028.
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Workzone 2024001 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Workzone 2024001 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,78 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info